Your Selected Vehicle
Parts for your 2023 Mitsubishi Asx-Headlights
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIMB
LED Autolamps Red LED Stop/Tail Lamp Insert For J3 Series Blister Pack - J3RM
LED Autolamps 12/24V Rear Indicator Lamp Red Reflector Blister Pack - 460AM
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail Lamp 49 LEDs With Bracket And 30cm Wire - 100RM
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMCSB
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMB
LED Autolamps Twin function side indicator with amber side marker - 97AIMCSB
LED Autolamps 12V Round Stop/Tail Lamp With Red Lens Recessed Mount - 102R
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIM
LED Autolamps 12V Round Indicator Lamp With Amber Lens Recessed Mount 130mm Diameter - 102A
2023 Mitsubishi ASX headlights — what they do and how to look after them
Headlights are absolutely relevant on the 2023 Mitsubishi ASX. Mitsubishi Motors’ MY23 ASX specifications and the Owner’s Manual list halogen projector or LED headlamps (model dependent), with auto light control and daytime running lamps on many trims—exactly what you’d expect to meet Australian Design Rules and NZ lighting requirements.
On this ASX, the headlights do the heavy lifting after dark and in poor weather, letting the driver see the road, hazards and signage while making the vehicle clearly visible to others. Low beam takes care of built-up areas without dazzling oncoming traffic, high beam helps on unlit rural roads. Auto dusk-sensing (where fitted) switches the lamps on when light levels drop, and the headlight levelling function helps keep the beam height sensible when the car’s loaded.
For halogen-equipped ASX models, bulbs are consumables. Many use H11 for low beam and HB3 (9005) for high beam, but the handbook should always be checked by VIN and trim. Replacing in pairs keeps beam colour and brightness even. When fitting new halogens, avoid touching the glass with bare fingers—skin oils can shorten bulb life. If the vehicle has factory LEDs, the headlamp is typically a sealed unit or uses an LED module, diagnosis and replacement is best left to a qualified technician to maintain cooling, sealing and beam pattern integrity.
Regular care makes a real difference. Keep lenses clean with a pH-neutral wash to avoid haze. If condensation appears inside a lamp, have the seals checked. After suspension work or a front-end knock, get the headlight aim verified. Fuses and relays live in the engine bay fuse box, a blown fuse is a quick check if a lamp won’t power up. Upgrading? Stick to ADR-compliant bulbs and avoid mismatched aftermarket LEDs that can scatter light and fail a WOF or roadworthy.
- Check operation (low/high beam, indicators, DRL) monthly.
- Replace halogen bulbs every 2–4 years or when dim/colour-shifted.
- Have LED headlamps tested and serviced professionally if output drops or faults appear.
Popular questions about 2023 Mitsubishi ASX headlights
Which bulb types does a 2023 ASX use?
Most halogen-equipped 2023 ASX variants commonly use H11 for low beam and HB3 (9005) for high beam. Upper trims may have LED headlamps with no user-replaceable bulb. Always confirm against the Owner’s Manual or a parts lookup for the specific VIN and trim.
Can the ASX headlights be upgraded to LED?
Aftermarket LED retrofit bulbs in halogen housings can create glare and may not meet ADR/WOF rules. If better performance is the goal, choose premium ADR-compliant halogen bulbs or consult a technician about approved OEM LED assemblies where available.
How do you know if the headlight aim is off?
If oncoming drivers flash you, the near-side verge isn’t illuminated, or the light pattern looks uneven on a wall test, the aim likely needs adjustment. Use the cabin levelling dial (if fitted) for load changes, and get a workshop to set aim to spec with proper equipment.