Your Selected Vehicle
Parts for your 2023 Mitsubishi Asx-Headlights
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps Front Marker LED White With Reflector 12-24V Perm Mnt - EU38WMHD
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
Explore 4WD & Adventure
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
2023 Mitsubishi ASX headlights — what they do and how to look after them
Headlights are absolutely relevant on the 2023 Mitsubishi ASX. Mitsubishi Motors’ MY23 ASX specifications and the Owner’s Manual list halogen projector or LED headlamps (model dependent), with auto light control and daytime running lamps on many trims—exactly what you’d expect to meet Australian Design Rules and NZ lighting requirements.
On this ASX, the headlights do the heavy lifting after dark and in poor weather, letting the driver see the road, hazards and signage while making the vehicle clearly visible to others. Low beam takes care of built-up areas without dazzling oncoming traffic, high beam helps on unlit rural roads. Auto dusk-sensing (where fitted) switches the lamps on when light levels drop, and the headlight levelling function helps keep the beam height sensible when the car’s loaded.
For halogen-equipped ASX models, bulbs are consumables. Many use H11 for low beam and HB3 (9005) for high beam, but the handbook should always be checked by VIN and trim. Replacing in pairs keeps beam colour and brightness even. When fitting new halogens, avoid touching the glass with bare fingers—skin oils can shorten bulb life. If the vehicle has factory LEDs, the headlamp is typically a sealed unit or uses an LED module, diagnosis and replacement is best left to a qualified technician to maintain cooling, sealing and beam pattern integrity.
Regular care makes a real difference. Keep lenses clean with a pH-neutral wash to avoid haze. If condensation appears inside a lamp, have the seals checked. After suspension work or a front-end knock, get the headlight aim verified. Fuses and relays live in the engine bay fuse box, a blown fuse is a quick check if a lamp won’t power up. Upgrading? Stick to ADR-compliant bulbs and avoid mismatched aftermarket LEDs that can scatter light and fail a WOF or roadworthy.
- Check operation (low/high beam, indicators, DRL) monthly.
- Replace halogen bulbs every 2–4 years or when dim/colour-shifted.
- Have LED headlamps tested and serviced professionally if output drops or faults appear.
Popular questions about 2023 Mitsubishi ASX headlights
Which bulb types does a 2023 ASX use?
Most halogen-equipped 2023 ASX variants commonly use H11 for low beam and HB3 (9005) for high beam. Upper trims may have LED headlamps with no user-replaceable bulb. Always confirm against the Owner’s Manual or a parts lookup for the specific VIN and trim.
Can the ASX headlights be upgraded to LED?
Aftermarket LED retrofit bulbs in halogen housings can create glare and may not meet ADR/WOF rules. If better performance is the goal, choose premium ADR-compliant halogen bulbs or consult a technician about approved OEM LED assemblies where available.
How do you know if the headlight aim is off?
If oncoming drivers flash you, the near-side verge isn’t illuminated, or the light pattern looks uneven on a wall test, the aim likely needs adjustment. Use the cabin levelling dial (if fitted) for load changes, and get a workshop to set aim to spec with proper equipment.