Skip to content Skip to navigation menu

Your Selected Vehicle

CATEGORIES

  • Globes, Batteries & Electrical
  • Electrical Accessories
  • Switches

Brands

Show More Show Less

Item Type

Show More Show Less

Price

Parts for your 2022 Toyota Prius-Headlights

Sort by

Explore 4WD & Adventure

Showing 1 - 39 of 497 products

2022 Toyota Prius Headlights

Headlights are absolutely relevant to the 2022 Toyota Prius. Technical sources including the 2022 Toyota Prius Owner’s Manual, Toyota Australia and New Zealand specification sheets, and applicable regulations such as Australia’s ADR 13/00 (Installation of Lighting and Light Signalling Devices) and New Zealand’s Vehicle Lighting Rule 2004 all confirm the vehicle is factory-fitted with LED headlamps, typically with auto-levelling and Automatic High Beam as part of Toyota Safety Sense.

On the 2022 Prius, the headlights do the heavy lifting whenever daylight fades or weather turns ordinary. The LED projector units throw a crisp, white beam that helps the driver see further down the road, pick up lane markings, and spot hazards early, while also making the car more visible to everyone else. Auto-levelling helps keep the beam height correct as the Prius is loaded up, and Automatic High Beam can dip for oncoming traffic so the driver doesn’t have to juggle the stalk as much.

Because the Prius uses LED technology, there’s no old-school halogen globe swap for the main beams in most trims. The LED modules are designed to last a long time, but they still benefit from a bit of care, and if one does fail, the usual remedy is replacing the headlamp assembly. That’s best left to a qualified tech, as the unit contains electronics, cooling, and seals that need proper handling, and aiming must meet ADR/NZ requirements.

As part of regular servicing, it’s smart to give the headlights a once-over. Keep the lenses clean with pH-neutral car wash, not harsh solvents. If UV haze appears, a professional restoration can bring clarity back. Ask the workshop to check beam aim after suspension work, a bumpy encounter with a kerb, or when fitting new tyres. Confirm Automatic High Beam is behaving as expected and that daytime running lamps and indicators within the housing are lighting up reliably. If moisture or condensation shows inside the lens, get the seal inspected promptly—left alone, it can shorten the life of the LED driver gear.

  • Test low and high beam function at every service interval.
  • Clean lenses gently