Your Selected Vehicle
Parts for your 2022 Toyota Land cruiser-Headlight bulbs
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps Front Marker LED White With Reflector 12-24V Perm Mnt - EU38WMHD
Explore 4WD & Adventure
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
2022 Toyota Land Cruiser headlight-bulbs: relevant or not?
For the 2022 Toyota Land Cruiser (300 Series), traditional headlight-bulbs aren’t used. This model runs LED headlamp technology, so the usual halogen or HID “bulb” replacement doesn’t apply. Technical sources back this up: Toyota’s 300 Series Owner’s Manual notes the headlights are LED type and advises dealer servicing for any replacement, Toyota Australia’s grade specifications list Bi‑LED headlights (and adaptive LED systems on higher trims), and the Toyota Electronic Parts Catalogue shows complete LED headlamp assemblies and LED driver modules rather than serviceable headlight bulbs.
Why no bulbs? The Land Cruiser’s LED headlamps are engineered as integrated units for stronger, cleaner light output, lower power draw, and long service life. The beam pattern and performance come from the LED chips, optics, and drivers working as a sealed system. On higher trims with adaptive high-beam or auto-levelling, the electronics are calibrated to the vehicle, which isn’t compatible with old-school bulb swaps.
What does that mean for owners? Maintenance is more about care than replacement:
- Keep lenses clean with pH‑neutral car wash, avoid abrasive polishes that can haze the polycarbonate.
- Skip high‑pressure spray right on the headlamp seams to protect seals and vents.
- If the lens is stone‑chipped or cracked, get it checked promptly—moisture can damage LEDs and drivers.
- Any dimming, flicker, warning messages, or auto‑levelling/AHB faults should be inspected by an authorised Toyota technician. Repairs usually involve an LED module or complete assembly, not a bulb.
It’s also worth noting compliance. Throwing aftermarket “bulbs” into an LED projector housing isn’t a thing here and can breach ADR/UNECE lighting rules, glare other road users, and void warranty. If an assembly needs replacing, professional fitment and beam aim checks are recommended, and some trims may require calibration of the headlamp control systems.
Owners after extra protection can consider quality paint-protection film for the lenses and schedule periodic headlight aim checks, especially after suspension mods or heavy towing—good practice for both Aussie and Kiwi roads.
Popular questions
Does the 2022 Land Cruiser have replaceable headlight bulbs?
No. It uses LED headlamps with no conventional bulbs. If a headlight fails, the repair is typically an LED module or full headlamp assembly replacement carried out by a Toyota dealer.
Can aftermarket bulbs be fitted to make the headlights brighter?
Not applicable. The LED headlamp is a sealed system, and “bulb upgrades” don’t fit or comply. For better performance, ensure the lenses are clear and the aim is correct, any upgrades should be genuine Toyota components to keep ADR/WOF compliance intact.
What maintenance keeps the LED headlights at their best?
Regularly wash the lenses, avoid harsh chemicals, protect them from chips if you tour on gravel, and have the aim and any adaptive functions checked during servicing—especially after suspension or accessory changes.