Parts for your 2022 Toyota C-hr-Pedal pads

2022 Toyota C-HR Pedal Pads — Purpose, Care, and When to Replace

Technical sources confirm pedal pads are indeed used on the 2022 Toyota C-HR. The Toyota Electronic Parts Catalogue (EPC) for the C-HR (AX10/AX50) lists a serviceable “Pad, Brake Pedal” (commonly catalogued under part numbers in the 47121-0D0xx range, varying by market and supersession). There’s no clutch on the local CVT models, and the accelerator is an integrated treadle with no separate rubber pad. The Toyota Repair Manual sections covering the brake pedal and the Owner’s Manual guidance on pedal inspection back this up.

On this C-HR, the brake pedal pad is a moulded rubber cover that gives the driver grippy, predictable pedal feel. It’s there to stop the foot slipping—especially in wet gear, sandy thongs, or muddy boots—and to help damp vibration. Because it’s a wear item, it should be checked routinely and replaced when it’s worn smooth, cracked, hardened, or starting to come loose at the edges.

For everyday care, a quick clean with mild soap and water keeps the pad free of polish, sunscreen, and road grime that can make it slippery. Avoid solvent-based cleaners and silicone dressings, they can harden the rubber or leave a slick film. Make sure the driver’s floor mat is securely clipped down and not riding up under the pedal.

Inspection is best done at each service (roughly every 10,000 to 15,000 kilometres). Look and feel for:

• Smooth, shiny patches or reduced tread pattern
• Cracks, tears, or hard, plasticky feel
• Pad edges lifting or the cover shifting on the metal pedal

Replacement is a quick driveway job. With the vehicle parked safely, peel the old pad off the pedal plate, clean the metal surface, then press the new pad on from the top edge and work around until all corners are fully seated. Give it a firm press test—no bunching, no movement. If using decorative alloy covers, ensure they’re approved for the C-HR and don’t foul pedal travel.

While the accelerator has no removable pad, it’s still smart to check it moves freely and returns normally. If anything feels sticky or unusual, get a technician to inspect it promptly.

Popular questions about 2022 Toyota C-HR pedal pads

Does the 2022 C-HR have a pedal pad on the accelerator?
No. The accelerator is an integrated plastic treadle assembly without a separate rubber pad. Only the brake pedal has a replaceable rubber pad on Australian and New Zealand 2022 C-HR models.

How often should the brake pedal pad be replaced?
There’s no fixed interval—replace it when the tread is worn smooth, it’s cracked, or it feels hard or slippery. Many drivers see replacement somewhere between 60,000 and 100,000 kilometres, but check it at every service.

What’s the correct part for a 2022 C-HR brake pedal pad?
Toyota lists it in the EPC as “Pad, Brake Pedal” for the AX10/AX50 series. Exact part numbers can vary by build date and supersession (often in the 47121-0D0xx family). Supplying the VIN to a Toyota parts counter ensures the right fit.