Your Selected Vehicle
Parts for your 2022 Toyota C-hr-Headlight bulbs
Narva 9-33 Volt Surface Mount LED rear end outline marker lamp(red) with Black cover and 0.5m cable - 96832B
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Explore 4WD & Adventure
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Narva MDL38 Stop/Tail/Indicator Red-Amber Lens LED 10 to 30V - 2 Pce - 93812BL2
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Narva Model 18 LED Side Marker/Cabin Marker/FEOM Light Amber 10-30V - 91800
Narva 9-33 Volt Surface Mount LED Side marker lamp(red/amber) with Chrome cover and 0.5m cable - 96802
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
2022 Toyota C‑HR headlight bulbs
For the 2022 Toyota C‑HR, traditional headlight bulbs aren’t a thing. Toyota equips this model with factory LED headlamp units that have the light source built into a sealed assembly. The Toyota C‑HR Owner’s Manual for this model year (Australia/New Zealand edition) notes that vehicles with LED headlights do not have serviceable bulbs and that headlight components should be replaced by an authorised Toyota dealer if they fail. Toyota’s genuine parts catalogues likewise list the headlamp as a complete LED assembly rather than a bulb-and-holder setup. So, headlight “bulbs” aren’t used or replaced on this vehicle.
Why no bulbs? LED headlamps offer better energy efficiency, crisp light output, and long service life compared with halogen bulbs. Because the LEDs, heat sinks, optics and control electronics are engineered to work together, the unit is sealed for performance and durability. That’s why the headlight isn’t opened up for a quick bulb swap—if a diode or driver fails, the correct fix is replacement of the entire headlamp assembly.
What can owners do? There’s still some simple care that keeps the C‑HR’s headlights in top nick:
- Keep the lenses clean with mild car shampoo and water—avoid harsh solvents and abrasive pads.
- Don’t blast the headlamp seals with a pressure washer.
- Check headlight aim after suspension or tyre changes, or if you notice poor cut‑off. Have a workshop adjust if needed.
- A little misting inside after wet weather can be normal