Parts for your 2022 Mitsubishi Eclipse cross-Exhaust gasket

2022 Mitsubishi Eclipse Cross Exhaust Gasket

Based on Mitsubishi technical sources—the Eclipse Cross Service Manual (Group 15: Exhaust) for GK/GL series and the Mitsubishi ASA electronic parts catalogue—the 2022 Eclipse Cross (including the 1.5L turbo-petrol and the PHEV) is fitted with exhaust gaskets. These include the cylinder head–to–exhaust manifold gasket and crush/donut or flange gaskets at the front pipe and other joints. So, an exhaust gasket is relevant to servicing this model.

The exhaust gasket on a 2022 Mitsubishi Eclipse Cross is there to keep hot gases sealed inside the exhaust stream from the moment they leave the cylinder head, past the turbo (on the 1.5T), through the catalytic converter and out the tailpipe. Sealing properly matters for performance, emissions, and comfort. A leak upstream of the turbo can mess with boost and fuel trims, while any leak before the oxygen sensors can skew readings and trigger dash lights.

They’re not a scheduled replacement item, but any time the manifold, turbo, front pipe or cat-back is removed, new gaskets should be fitted. Mitsubishi specifies replacing crush/donut gaskets and any single-use fasteners once disturbed. Avoid silicon sealants on exhaust joints—use the correct multi-layer steel or graphite-style gaskets as listed for the VIN. Faces should be clean and flat