Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2021 Toyota Aqua-Radiator

Sort by
Repco Radiator Fin Straightener & Cleaner - RST18

Repco Radiator Fin Straightener & Cleaner - RST18

$20
Fitment Notes:
See More
Tee-Kay Head Chek - HEADCHEK

Tee-Kay Head Chek - HEADCHEK

$105
Fitment Notes:
See More
Repco Radiator Cooling System Kit - RTT1019

Repco Radiator Cooling System Kit - RTT1019

$906
Fitment Notes:
See More
Repco Radiator Pressure Tester Kit - RTT1017

Repco Radiator Pressure Tester Kit - RTT1017

$617
Fitment Notes:
See More
T&E Tools Radiator Back Flusher

T&E Tools Radiator Back Flusher

$92
Fitment Notes:
See More
Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

$27
Fitment Notes:
See More
Toledo Radiator Back Flusher - 308237

Toledo Radiator Back Flusher - 308237

$116
Fitment Notes:
See More

Explore 4WD & Adventure

Toledo Radiator Fin Straightener - 308240

Toledo Radiator Fin Straightener - 308240

$22
Fitment Notes:
See More
T&E Tools Radiator Fin Straightener

T&E Tools Radiator Fin Straightener

$43
Fitment Notes:
See More
Gates Hose Cutter up to 3in ID - 91143

Gates Hose Cutter up to 3in ID - 91143

$213
Fitment Notes:
See More
Toledo Coolant Filler Funnel Set - 305092

Toledo Coolant Filler Funnel Set - 305092

$224
Fitment Notes:
See More
Repco Cooling System Pressure Test Kit - RST194

Repco Cooling System Pressure Test Kit - RST194

$368
Fitment Notes:
See More
Repco 3 Pc Hose Pinching Pliers Set - RST234

Repco 3 Pc Hose Pinching Pliers Set - RST234

$44
Fitment Notes:
See More
T&E Tools Multi-Directional Hose Clamp Pliers

T&E Tools Multi-Directional Hose Clamp Pliers

$61
Fitment Notes:
See More
Toledo Powerbar Impact Wrench - 301337

Toledo Powerbar Impact Wrench - 301337

$208
Fitment Notes:
See More
Viper Brite Coil Cleaner 3.78L - RT300G

Viper Brite Coil Cleaner 3.78L - RT300G

$337
Fitment Notes:
See More
Toledo Cooling System Tester Truck - 308380

Toledo Cooling System Tester Truck - 308380

$787
Fitment Notes:
See More
T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

$94
Fitment Notes:
See More
T&E Tools Universal Automotive Thermometer

T&E Tools Universal Automotive Thermometer

$31
Fitment Notes:
See More
Showing 1 - 20 of 20 products

2021 Toyota Aqua radiator — purpose, care, and replacement

A radiator is absolutely fitted to the 2021 Toyota Aqua. Technical sources including Toyota Global Newsroom’s 2021 Aqua launch material, the Toyota Repair Manual for the M15A-FXE engine cooling system, and Toyota’s Electronic Parts Catalogue (EPC) all confirm the Aqua’s 1.5‑litre M15A‑FXE hybrid petrol engine is liquid‑cooled and uses a conventional radiator, electric water pump, thermostat, cooling fans, and associated hoses.

In this hybrid, the radiator’s job is straightforward: carry engine heat away via coolant and dump it into outside air so the engine runs in its sweet spot. The Aqua’s hybrid system loves efficient temperatures, stable coolant temps help fuel economy, performance, and long-term reliability. Many Aqua variants also have a separate inverter/PCU cooling loop with its own small cooler up front, so owners should expect two translucent coolant reservoirs under the bonnet—one for the engine, one for the hybrid electronics.

For servicing in Australia or New Zealand, the correct coolant is Toyota Super Long Life Coolant (pink), premixed. Typical Toyota schedules call for an initial coolant replacement around 160,000 km or 10 years, then every 80,000 km or 5 years thereafter, but always follow the owner’s manual or local dealer guidance. Check levels monthly, and never mix coolant colours or brands.

  • Inspect for crusty residue, damp spots, or sweet smells around the radiator, water pump, hoses, and end tanks.
  • Look through the grille: bent fins, corrosion, or debris reduce cooling—blow clean with low‑pressure air.
  • Confirm both radiator fans spin freely and kick in when hot or when the A/C is on.
  • Only top up when the engine is cold, use Toyota SLLC or demineralised water in a pinch, then correct with SLLC.
  • Replace the radiator cap if the seal is cracked or the spring feels weak.
  • Dispose of old coolant responsibly, it’s toxic to pets and wildlife.

Thinking about replacement? Common triggers are overheating, leaks at plastic end tanks, damaged cores, or repeated low‑coolant warnings. A proper job involves draining the system, removing the fan shroud, hoses, and radiator, then refilling and bleeding—ideally with a vacuum fill to avoid air pockets. Hybrids add one caution: steer clear of orange high‑voltage cabling and components, the radiator sits in the low‑voltage cooling system but safe workshop practices still matter. After replacement, verify there’s strong cabin heat, no gurgling, stable temperature, and both fans cycle normally on a road test.

Popular question: What coolant should be used in a 2021 Toyota Aqua radiator?

Toyota Super Long Life Coolant (SLLC), pink, premixed, is the go‑to.

It’s an OAT formulation designed for Toyota alloy engines.

Do not mix pink with green or blue coolants.

If topping up on the road, use demineralised water sparingly.

Then restore the correct mix with SLLC as soon as possible.

Check both reservoirs: engine and inverter/PCU if fitted.

Only open the cap when the engine is stone cold.

Use a clean funnel to avoid introducing grit.

After any major top‑up, bleed the system properly.

Vacuum filling helps prevent air pockets.

Aftermarket coolants must meet Toyota SLLC specs.

When in doubt, ask a Toyota dealer for the correct product.

Popular question: How often should the 2021 Toyota Aqua radiator coolant be changed?

Follow Toyota’s typical interval: up to 160,000 km or 10 years first change.

Then every 80,000 km or 5 years thereafter.

Always confirm with the owner’s manual for your market.

Harsh conditions may justify earlier service.

If the coolant looks rusty, oily, or murky, change it early.

Any cooling system repair warrants a fresh fill and bleed.

Service the inverter/PCU loop on the same timetable.

Record the date and odometer at each change.

Use new clamps or hoses if they’re perished.

Pressure‑test after service to confirm no leaks.

Check fan operation and warm‑up behaviour post‑flush.

A quick road test should show stable temperature and good heater output.