Parts for your 2020 Subaru Xv-Headlights

2020 Subaru XV Headlights

Headlights are absolutely fitted to the 2020 Subaru XV. Technical references including the 2020 Subaru XV Owner’s Manual (AU/NZ), Subaru Australia and Subaru New Zealand specification guides, and ANCAP/ADR lighting requirements confirm the XV ships with either halogen projector headlights on entry variants or LED steering-responsive headlights (SRH) with auto-levelling on higher trims. So yes—headlights are relevant, essential, and part of regular servicing on this model.

On the road, the XV’s headlights do two jobs: they help the driver see clearly at night and in poor weather, and they make the vehicle more visible to others. Halogen units deliver a dependable, warm beam, while the LED SRH setup throws a crisp white light and can swivel with steering input to better illuminate corners. Both meet Australian and New Zealand standards for beam pattern and glare control, and the LED versions add auto on/off and auto-levelling for set-and-forget convenience.

As part of routine servicing, a quick headlight check goes a long way. For halogen-equipped XVs, bulb replacement is straightforward: use quality H11 (low beam) and HB3/9005 (high beam) equivalents specified in the owner’s manual, replace bulbs in pairs for even colour and brightness, and avoid touching the glass with bare fingers. For LED-equipped vehicles, the light source is typically an integrated module, Subaru advises dealer replacement because it involves sealed components and alignment checks. Either way, keep the polycarbonate lenses clean with mild car shampoo—no harsh abrasives—and inspect for haze or yellowing. Professional restoration can recover clarity if needed.

If a headlight looks dim or flickery, check the relevant fuses in the engine bay fuse box and confirm the back-caps are seated to keep moisture out. A light film of condensation can be normal after rain or a wash and should clear after a decent drive, persistent moisture or pooling water needs attention. Beam aim matters too: halogen models often include a manual leveller dial inside, LED systems usually self-level, but aiming can be checked during a service to ensure the beam isn’t too high or low, especially after suspension or load changes.

• Clean lenses regularly and inspect wiring and seals.
• Use the bulb types listed in the owner’s manual for your trim.
• Have LED headlight faults diagnosed by a qualified technician.

Popular questions about 2020 Subaru XV headlights

Which headlight bulbs does a 2020 Subaru XV use?

Entry variants commonly use halogen H11 low beam and HB3/9005 high beam. Higher trims use LED steering-responsive headlights with integrated modules rather than separate bulbs. Always confirm by VIN in the owner’s manual or parts catalogue, as market and trim can differ.

If it’s LED, replacement is a workshop job due to sealed components and required alignment checks. Halogen bulbs are typically DIY-friendly with basic tools and care.

Why do my XV’s headlights fog up sometimes?

Brief internal fogging after rain or a wash is generally normal—vented housings allow pressure equalisation and the moisture usually clears after a drive with lights on. If you see persistent misting, visible droplets, or water pooling, the back-cap or vent may be compromised and should be inspected.

Can the headlight aim be adjusted?

Halogen-equipped XVs often have a dashboard leveller and mechanical adjusters on the housing for workshop aiming. LED systems typically auto-level, but aim can still be verified and adjusted by a technician. Correct aim improves night vision and prevents glare for oncoming traffic.