Your Selected Vehicle
Parts for your 2020 Mitsubishi Asx-Batteries
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 30m Roll (NZ Ref.153) - ACX0808
Fitment Notes:
Explore 4WD & Adventure
Narva Sealed Rocker Switch Momentary On/Off/Momentary On DPDT 12V Blue Illuminated Winch Symbol (Contacts Rated 20A @ 12V Only) - 63148BL
Fitment Notes:
LED Autolamps Tray Conversion Kit to Suit Ford Ranger/ Mazda BT-50 Contains Two Cables - PATCH-RANGERBT50
Fitment Notes:
Batteries in the 2020 Mitsubishi ASX: What You Need to Know
The 2020 Mitsubishi ASX definitely relies on a battery, just like most modern petrol and diesel cars on the road today. It's not an electric or hybrid vehicle, so there's no high voltage battery pack underneath the floor or tucked away like those found in EVs. Instead, it has a standard 12-volt lead-acid battery, which is essential for starting the engine and powering all the electrical components within the car.
The battery in a 2020 Mitsubishi ASX serves several key jobs. Primarily, it gives the initial electrical boost to crank the engine when you turn the ignition on. Without a reliable battery, the starter motor won't have enough juice to fire up the engine. Beyond just starting the vehicle, the battery also helps to supply power to various systems like the lights, radio, infotainment system, power windows, central locking, and even safety features when the engine isn't running.
Once the engine is running, the alternator kicks in to take over supplying electrical power and to recharge the battery, ensuring it stays topped up during your drive. Still, the battery remains critical during short trips where the alternator may not fully recharge it or when lots of electrical accessories are used with the engine off.
When it comes to maintenance and replacement, the battery is a part that definitely deserves a bit of attention during servicing. Over time, the battery's capacity to hold a charge diminishes, especially if the car is mainly used for short trips or sits unused for extended periods, which can be a common scenario in Australia's suburban lifestyle.
A few signs the battery might need replacing include slower engine starts, dimming headlights, or warning lights on the dashboard related to the electrical system. Checking the battery during regular servicing helps avoid unexpected breakdowns and keeps everything electrical running smoothly.
Here are some tips for maintaining the 12V battery in a 2020 Mitsubishi ASX:
- Keep the battery terminals clean and free of corrosion. Corrosion can build up over time and reduce electrical connection efficiency.
- Check the battery securely mounts in its tray to avoid vibrations that can damage the cells inside over time.
- Drive the car regularly for at least 20 minutes to allow the alternator to recharge the battery properly.
- Consider using a battery maintainer or trickle charger if the ASX is stored for long periods without use.
- Have the battery tested during routine servicing to measure its capacity and ability to hold a charge under load.
When it's time to replace the battery, it's best to choose one that matches the original specifications recommended by Mitsubishi for the ASX. This will ensure it has the right capacity and cold cranking amps needed for reliable starts, especially during cooler or early morning conditions.
Replacing the battery is a relatively straightforward process, but some owners prefer to have it done during scheduled servicing for peace of mind. The cost of a new battery for the 2020 Mitsubishi ASX is generally reasonable and well worth the investment given the essential role it plays in the vehicle's day-to-day operation.
Overall, the 12-volt battery in the 2020 Mitsubishi ASX is a small but mighty component. It quietly supports everything from starting the engine to running the electric systems when parked. Paying attention to battery health and regular maintenance can save hassles and keep the ASX ready to go whenever the next adventure calls.
