Parts for your 2020 Audi Q5-Oil seals

2020 Audi Q5 Oil Seals

Oil seals absolutely are used on the 2020 Audi Q5. Technical references such as the Audi Workshop Manual for Q5 (Type FY, via Audi erWin), Audi Self‑Study Programmes for the EA888 Gen.3B 2.0 TFSI engine, ZF 8HP Tiptronic service information, and the Audi/VW parts catalogue (ETKA) all document multiple radial shaft seals fitted across the engine, transmission, transfer case, and differentials. Whether the Q5 is a 45 TFSI with the DL382 7‑speed S tronic or an SQ5/40 TDI with the ZF 8‑speed Tiptronic, each variant relies on oil seals to keep lubricants in and contaminants out.

In this Q5, oil seals sit at the front and rear of the crankshaft, around camshaft ends, at the turbocharger’s oil interfaces, and on the gearbox and driveline (input/output shafts, axle flanges, transfer case and rear differential pinion). Their job is simple but critical: maintain oil pressure and lubrication while preventing leaks that can damage belts, clutches, mechatronics, and bearings, or create a mess on the driveway.

There’s no fixed replacement interval for oil seals