Parts for your 2019 Toyota Mark x-Wheel hubs

2019 Toyota Mark X wheel hubs: what they do and how to look after them

Based on Toyota’s GRX130-series repair manual (Chassis: Axle & Hub sections) and the Toyota Electronic Parts Catalogue for the 2018–2019 production Mark X, this model uses bolt-on wheel hub assemblies with integrated, sealed bearings at both front and rear. The hubs also incorporate the ABS encoder interface. So yes—wheel hubs are absolutely relevant and fitted to the 2019 Toyota Mark X.

On the Mark X, each wheel hub is the central mounting point for the wheel and tyre. It houses a precision, sealed bearing that lets the wheel spin smoothly, keeps the rotor and wheel running true, and feeds clean speed signals to the ABS and stability control. Because the bearings are sealed, there’s no routine greasing—maintenance is all about inspection, correct torque on the wheel nuts, and replacing the hub assembly if wear shows up.

Typical signs a hub is on the way out include:

• A humming or growling that gets louder with road speed or when loading one side in a bend
• Play felt at the wheel at 12 and 6 o’clock, or vague steering and uneven tyre wear
• ABS light on, or pulsing from a damaged encoder ring

For servicing a 2019 Mark X, it’s smart to check for bearing noise on every service or tyre rotation. Spin each wheel off the ground and listen, then feel for roughness. Make sure wheel nuts are torqued to factory spec—over-tightening can bruise the bearing, and under-tightening can let the rotor and wheel fret on the hub face. Keep the hub face clean and free of rust scale so wheels seat dead flat