Parts for your 2019 Toyota Hilux-Wheel hubs

2019 Toyota Hilux wheel-hubs: what they do and how to look after them

Based on Toyota’s Repair Manual for the N80-series Hilux (2015–2020), the Toyota Electronic Parts Catalogue (EPC) for GUN/AN models, and dealer service procedures used in Australia and New Zealand, wheel-hubs are absolutely fitted and relevant on the 2019 Toyota Hilux. The 4x4 models use an Automatic Disconnecting Differential (ADD) rather than manual free‑wheeling hubs, but they still have front and rear hub and bearing assemblies that support the wheels, carry the brake rotors/drums, and house the wheel studs and ABS tone components.

On a 2019 Hilux, the wheel-hubs sit at the heart of each corner, keeping the wheels turning smoothly and straight. They hold the studs your wheels bolt to, locate the brake rotor, and contain the hub bearing that carries vehicle weight and copes with cornering loads. In 4x4 variants, the front hub also mates to the CV shaft via a drive flange, with the ADD system handling engagement—so there’s no manual locking hub to twist on the kerb.

There’s no fixed replacement interval for Hilux wheel-hubs