Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2019 Toyota C-hr-Radiator

Sort by
Repco Radiator Fin Straightener & Cleaner - RST18

Repco Radiator Fin Straightener & Cleaner - RST18

$20
Fitment Notes:
See More
Tee-Kay Head Chek - HEADCHEK

Tee-Kay Head Chek - HEADCHEK

$105
Fitment Notes:
See More
Repco Radiator Cooling System Kit - RTT1019

Repco Radiator Cooling System Kit - RTT1019

$906
Fitment Notes:
See More
Repco Radiator Pressure Tester Kit - RTT1017

Repco Radiator Pressure Tester Kit - RTT1017

$617
Fitment Notes:
See More
T&E Tools Radiator Back Flusher

T&E Tools Radiator Back Flusher

$92
Fitment Notes:
See More
Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

$27
Fitment Notes:
See More
Toledo Radiator Back Flusher - 308237

Toledo Radiator Back Flusher - 308237

$116
Fitment Notes:
See More

Explore 4WD & Adventure

Toledo Radiator Fin Straightener - 308240

Toledo Radiator Fin Straightener - 308240

$22
Fitment Notes:
See More
T&E Tools Radiator Fin Straightener

T&E Tools Radiator Fin Straightener

$43
Fitment Notes:
See More
Gates Hose Cutter up to 3in ID - 91143

Gates Hose Cutter up to 3in ID - 91143

$213
Fitment Notes:
See More
Toledo Coolant Filler Funnel Set - 305092

Toledo Coolant Filler Funnel Set - 305092

$224
Fitment Notes:
See More
Repco Cooling System Pressure Test Kit - RST194

Repco Cooling System Pressure Test Kit - RST194

$368
Fitment Notes:
See More
Repco 3 Pc Hose Pinching Pliers Set - RST234

Repco 3 Pc Hose Pinching Pliers Set - RST234

$44
Fitment Notes:
See More
T&E Tools Multi-Directional Hose Clamp Pliers

T&E Tools Multi-Directional Hose Clamp Pliers

$61
Fitment Notes:
See More
Toledo Powerbar Impact Wrench - 301337

Toledo Powerbar Impact Wrench - 301337

$208
Fitment Notes:
See More
Viper Brite Coil Cleaner 3.78L - RT300G

Viper Brite Coil Cleaner 3.78L - RT300G

$337
Fitment Notes:
See More
Toledo Cooling System Tester Truck - 308380

Toledo Cooling System Tester Truck - 308380

$787
Fitment Notes:
See More
T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

$94
Fitment Notes:
See More
T&E Tools Universal Automotive Thermometer

T&E Tools Universal Automotive Thermometer

$31
Fitment Notes:
See More
Showing 1 - 20 of 20 products

2019 Toyota C‑HR radiator: what it does, and how to look after it

Per Toyota’s technical literature—the 2019 C‑HR Repair Manual and New Car Features documents for the 2.0‑litre petrol (M20A‑FKS), 1.2‑litre turbo (8NR‑FTS), and 1.8‑litre hybrid (2ZR‑FXE)—and the Toyota Electronic Parts Catalogue, every 2019 Toyota C‑HR is liquid‑cooled and fitted with a front‑mounted engine radiator with electric cooling fans. So, yes, a radiator is absolutely relevant on this model, including the hybrid which also has a separate cooling loop for its hybrid components.

On a 2019 Toyota C‑HR, the radiator’s job is straightforward but critical: it sheds heat from the engine coolant so the engine runs at the right temperature under Aussie and Kiwi conditions—city crawls, coastal humidity, or a long uphill slog. The water pump circulates coolant through the block and head, the thermostat regulates flow, and the fans step in when airflow through the grille isn’t enough under the bonnet.

For day‑to‑day reliability, the right coolant is key. Toyota specifies Super Long Life Coolant (SLLC), which is pink and premixed. The factory schedule typically calls for an initial coolant replacement around 160,000 km or 10 years, then about every 80,000 km or 5 years thereafter, always follow the maintenance schedule in the C‑HR’s owner’s manual for your exact variant and market. Hybrids have engine and inverter/electronics loops—each has its own interval.

When servicing or replacing a 2019 C‑HR radiator, good practice matters. A quality OE or equivalent radiator keeps the core efficient and corrosion at bay. Fresh caps and clamps are cheap insurance, and correct bleeding prevents air pockets that can cause hot spots or weak cabin heat. If the temperature gauge wanders, there’s a sweet coolant smell, pink crust on fittings, or the fans are running constantly, it’s time for a check.

  • Inspect coolant level/colour at every service, top up only with Toyota SLLC.
  • Pressure‑test the system if there’s any sign of leaks, check hoses, clamps, and the radiator cap.
  • Flush and refill on schedule, use the correct bleeding procedure to purge air.
  • Make sure both cooling fans cut in, scan for fault codes if they don’t.
  • Keep the condenser and radiator fins clear of bugs and road grime, straighten bent fins gently.
  • Dispose of old coolant responsibly—don’t tip it down the drain.

Done right, the 2019 Toyota C‑HR radiator will deliver stable temps, better heater performance, and long engine life, whether it’s the 2.0 petrol, the punchy 1.2T, or the super‑frugal hybrid.

Popular questions

Does the 2019 Toyota C‑HR have a radiator?

Yes. All 2019 C‑HR variants—petrol and hybrid—use a conventional engine radiator with electric cooling fans. The hybrid also has a separate cooling circuit for hybrid components, but it still relies on an engine radiator for the petrol engine itself.

How often should coolant be changed on a 2019 C‑HR?

Toyota generally specifies Super Long Life Coolant with an initial change around 160,000 km or 10 years, then roughly every 80,000 km or 5 years. Always check the owner’s manual for the exact interval for your engine and local conditions.

What are signs the radiator needs attention on a 2019 C‑HR?

Watch for temperature fluctuations, the low coolant light, a sweet smell, pink residue around hose connections, damp patches under the front of the car, weak cabin heat, or cooling fans running more than usual. Any of these warrant an inspection and pressure test.