Your Selected Vehicle
Parts for your 2019 Subaru Impreza-Wheel hubs
Explore 4WD & Adventure
2019 Subaru Impreza wheel hubs: what they do and when to service them
Technical sources confirm the 2019 Subaru Impreza absolutely uses wheel hubs. The Subaru Technical Information System (STIS) service manual for 2019MY Impreza lists “Hub Unit Bearing” procedures in both Front Axle and Rear Axle sections, and the Subaru Genuine Parts Catalogue shows complete bolt-on hub and bearing assemblies with integrated wheel studs and ABS encoder functionality at all four corners. That makes wheel hubs directly relevant to the model.
On this Impreza, each hub unit carries the wheel, houses a sealed-for-life bearing, and provides the mounting for the brake rotor and wheel studs. It also works with the ABS/traction control system via an encoder ring and wheel speed sensor. Because these are sealed hub unit bearings, they’re not greased or rebuilt in service—when worn or noisy, the full assembly is replaced.
What’s the point? Smooth rotation, correct wheel alignment to the knuckle, and clean ABS signals—key for braking stability in a Symmetrical AWD Subaru. A healthy hub keeps tyres wearing evenly and stops that droning hum that rises with road speed.
- Common signs a hub is on the way out:
- Droning or rumbling that changes with speed or when loading one side through a bend
- ABS light, intermittent traction control intervention, or uneven/erratic wheel speed readings
- Play felt at the wheel when checked at 12 and 6 o’clock (with vehicle securely lifted)
- Heat at the hub after a short drive compared with the other side
For servicing, workshops typically inspect hub condition at routine intervals—especially once past higher kilometres or after pothole hits. Because these hubs are sealed, the focus is on checks and precise replacement when needed. Use quality hub assemblies suitable for the 2019 Impreza’s active ABS (wrong encoder type can trigger faults). Renew single‑use hardware such as axle nuts and hub bolts as specified in the Subaru manual, and always torque fasteners to manufacturer specs. Clean the knuckle and rotor mating faces to prevent runout, avoid lubricants on wheel studs, and torque wheel nuts evenly in a star pattern. An alignment generally isn’t required for hub-only work if strut-to-knuckle fasteners aren’t loosened, but it’s wise to verify steering feel and tyre wear afterwards.
- Inspect for noise/play each service, sooner if there’s an ABS warning or impact damage.
- Replace the faulty hub, pairing both sides is optional but can be sensible at high kilometres.
- After replacement, road test for noise, ABS operation, and brake feel, then recheck wheel-nut torque.
Popular questions about 2019 Subaru Impreza wheel hubs
How long do wheel hubs typically last on a 2019 Impreza?
Service life varies with roads, loads, and tyre choices, but many owners see 100,000–200,000 km or more. Frequent rough-road use, water ingress, or heavy impacts can shorten that window. Regular checks help catch early bearing noise before it becomes a safety issue.
Do hubs need to be replaced in pairs?
Not strictly. Technicians generally replace the side that’s noisy or has play. If the vehicle has high kilometres or similar wear both sides, replacing in pairs can save downtime. Always confirm the correct ABS encoder type for the 2019 Impreza to avoid warning lights.
What is the wheel bolt pattern on the 2019 Impreza?
The 2019 Subaru Impreza uses a 5×100 bolt pattern. That pattern is defined by the hub—and ensures compatible wheels mount properly and can be torqued to spec without vibration.
