Parts for your 2019 Honda Odyssey-Wheel hubs

2019 Honda Odyssey wheel hubs — what they do and when to replace them

Wheel hubs absolutely are used on the 2019 Honda Odyssey. Honda’s own Service Manual for the 2018–2020 Odyssey details “Front Hub Unit Bearing” and “Rear Hub Bearing Unit” replacement procedures, and the Honda Genuine Parts catalogue lists complete front and rear hub-bearing assemblies for the MY2019 Odyssey, each with an integrated sealed bearing and ABS tone ring. These technical sources confirm wheel hubs are relevant and fitted to this model.

On this Odyssey, each hub is a unitised assembly that centres the wheel, supports vehicle load through a sealed bearing, and provides the mounting surface for the wheel and brake disc (or drum/rotor hat). The hub also carries the wheel studs and, via an encoder/tone ring, feeds wheel speed data to the ABS/traction control. Because the bearings are sealed for life, there’s no periodic greasing or bearing adjustment like old-school setups — when wear sets in, the whole hub assembly is replaced.

As part of routine servicing, it’s smart to check for early signs of hub wear. A quiet test drive and a quick inspection on a hoist go a long way.

• Listen for a speed-dependent humming or growl that gets louder when loading that corner in a gentle lane change.
• Feel for play when rocking the wheel at 12 and 6 o’clock (with the vehicle safely lifted).
• Watch for ABS or VSA warning lamps, roughness when spinning a wheel by hand, or heat at the hub after a drive.
• Uneven tyre wear or steering vagueness can also point to a tired hub bearing.

Replacement on the Odyssey is a bolt-off/bolt-on job: the unitised hub bolts to the knuckle (front) or rear carrier, and the front passes over the driveshaft. Best practice is to use quality parts, clean mating surfaces, follow Honda torque specs, fit new axle nuts where specified, and handle wheel speed sensors with care. After fitting, a road test and a scan for ABS codes are good form, an alignment check is worthwhile if there was impact damage or suspension work alongside the hub job.

There’s no set kilometre interval — many hubs run well past 150,000 km — but family-hauler duty, towing, rough roads, and potholes can shorten their life. Catching a noisy hub early keeps tyres, brakes, and ABS happy, and keeps the Odyssey riding quietly for the long haul.

Popular questions

How long do wheel hubs last on a 2019 Honda Odyssey?
Many owners see 120,000–200,000 km or more from original hubs. Longevity depends on road quality, load, and wheel impacts. If it stays quiet and free of play at service checks, it’s fine to keep running.

What symptoms mean a wheel hub is failing on a 2019 Odyssey?
A steady speed-related hum or growl that changes when turning, detectable wheel play, ABS/VSA warnings, or heat at the hub are the big giveaways. Tyre cupping and a rough feel when the wheel is spun by hand are other clues.

Do you need a wheel alignment after replacing a hub?
A hub swap alone doesn’t change alignment angles on the Odyssey. That said, if there was curb impact, suspension work, or uneven tyre wear, asking for an alignment check is a sensible add-on.