Parts for your 2019 Audi Q5-Oil seals

2019 Audi Q5 Oil Seals — What They Do and When to Replace Them

Technical sources confirm the 2019 Audi Q5 absolutely uses oil seals throughout its powertrain. Audi’s erWin Workshop Manual for the FY-series Q5 (2018–2020) details radial shaft seals at the crankshaft (front and rear main), camshafts, transmission input/output shafts, and drive axles. The Audi ETKA parts catalogue likewise lists these seals under engine, gearbox, transfer case and final drive groups for the FY Q5 with 2.0 TFSI and S tronic drivetrains. These references make it clear: oil seals are integral to the Q5’s design.

For this model, oil seals keep engine oil, transmission fluid and final-drive oil where they should be, while keeping dust and moisture out. They also help maintain correct internal pressures. On the 2019 Q5, key seals include the front crank seal behind the pulley, the rear main seal between the engine and S tronic gearbox, camshaft seals at the timing end, axle flange seals at the transmission and rear final drive, and propshaft/output seals in the AWD hardware.

Oil seals aren’t a scheduled service item