Skip to content Skip to navigation menu

Your Selected Vehicle

Categories

  • Parts & Service
  • Suspension Parts

Brands

Price

Parts for your 2018 Toyota Vitz|yaris-Suspension bushes

Sort by
Showing 1 - 1 of 1 products

2018 Toyota Vitz/Yaris Suspension Bushes — What They Do and When to Replace

Yes, the 2018 Toyota Vitz/Yaris is fitted with suspension bushes. Technical references confirm it: Toyota’s workshop information for the XP130-series (2017–2020) specifies a front MacPherson strut layout with lower control arm bushes, plus a rear torsion-beam axle with beam bushes. The model also uses stabiliser (sway) bar D-bushes and link bushes. These items are listed in Toyota’s Electronic Parts Catalogue and appear in mainstream service manuals and aftermarket catalogues for the Vitz/Yaris of this generation.

On this Vitz/Yaris, the front lower control arm bushes help keep steering feel tight and wheel alignment steady, while soaking up harshness from coarse-chip roads. The rear torsion-beam bushes let the back end flex just enough for comfort without letting the car wander. Stabiliser bar bushes clamp the bar so it can control body roll without squeaks or play. Together, these rubber components isolate vibration, reduce cabin noise, and maintain precise suspension geometry — which means better tyre life, better braking stability, and a more settled drive.

As part of routine servicing, it’s smart to have the suspension bushes inspected for cracks, splits, perishing, or oil contamination. On cars that see lots of city kerbs, gravel, or coastal conditions, a closer look every 20,000–30,000 km is worthwhile. Typical replacement intervals vary widely (often 80,000–150,000 km), but condition beats kilometres — if there’s movement in the arm, clunks over bumps, vague steering on the motorway, or uneven tyre wear, they’re likely due.

  • Common wear points: front lower control arm rear bush, front stabiliser D-bushes, rear torsion-beam bushes.
  • Best practice: replace bushes in axle pairs, torque bolts at normal ride height, and book a wheel alignment after front-end work. Rear alignment check is still wise to confirm thrust angle.
  • Part choice: genuine-style rubber keeps NVH civilised