Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2018 Toyota Avensis-Radiator

Sort by
Repco Radiator Fin Straightener & Cleaner - RST18

Repco Radiator Fin Straightener & Cleaner - RST18

$20
Fitment Notes:
See More
Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

$27
Fitment Notes:
See More
Repco 3 Pc Hose Pinching Pliers Set - RST234

Repco 3 Pc Hose Pinching Pliers Set - RST234

$44
Fitment Notes:
See More
Tee-Kay Head Chek - HEADCHEK

Tee-Kay Head Chek - HEADCHEK

$105
Fitment Notes:
See More
Repco Radiator Cooling System Kit - RTT1019

Repco Radiator Cooling System Kit - RTT1019

$906
Fitment Notes:
See More
Repco Radiator Pressure Tester Kit - RTT1017

Repco Radiator Pressure Tester Kit - RTT1017

$617
Fitment Notes:
See More
T&E Tools Radiator Back Flusher

T&E Tools Radiator Back Flusher

$92
Fitment Notes:
See More

Explore 4WD & Adventure

Toledo Radiator Back Flusher - 308237

Toledo Radiator Back Flusher - 308237

$116
Fitment Notes:
See More
Toledo Radiator Fin Straightener - 308240

Toledo Radiator Fin Straightener - 308240

$22
Fitment Notes:
See More
T&E Tools Radiator Fin Straightener

T&E Tools Radiator Fin Straightener

$43
Fitment Notes:
See More
Gates Hose Cutter up to 3in ID - 91143

Gates Hose Cutter up to 3in ID - 91143

$213
Fitment Notes:
See More
Toledo Coolant Filler Funnel Set - 305092

Toledo Coolant Filler Funnel Set - 305092

$224
Fitment Notes:
See More
Repco Cooling System Pressure Test Kit - RST194

Repco Cooling System Pressure Test Kit - RST194

$368
Fitment Notes:
See More
T&E Tools Multi-Directional Hose Clamp Pliers

T&E Tools Multi-Directional Hose Clamp Pliers

$61
Fitment Notes:
See More
Toledo Powerbar Impact Wrench - 301337

Toledo Powerbar Impact Wrench - 301337

$208
Fitment Notes:
See More
Viper Brite Coil Cleaner 3.78L - RT300G

Viper Brite Coil Cleaner 3.78L - RT300G

$337
Fitment Notes:
See More
T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

$94
Fitment Notes:
See More
Toledo Cooling System Tester Truck - 308380

Toledo Cooling System Tester Truck - 308380

$787
Fitment Notes:
See More
T&E Tools Universal Automotive Thermometer

T&E Tools Universal Automotive Thermometer

$31
Fitment Notes:
See More
Showing 1 - 20 of 20 products

2018 Toyota Avensis Radiator — Purpose, Care, and Replacement

Based on Toyota’s factory service information (Toyota TechDoc), the 2018 Avensis owner’s manual, and independent references such as Haynes for the T27 series and Autodata cooling diagrams, the 2018 Toyota Avensis is a liquid‑cooled internal combustion vehicle and is fitted with a front‑mounted radiator with electric cooling fans. So yes — a radiator is absolutely relevant and used on this model.

The radiator’s job is straightforward: it sheds heat from the engine coolant so the Avensis runs at the right temperature, under the bonnet and on the open road. Coolant circulates from the engine through the aluminium core, airflow and fans pull heat away, then the thermostat and ECU keep everything in the sweet spot. On many automatic versions, the radiator also houses a transmission fluid cooler, and it sits just behind the A/C condenser, so good airflow matters.

For routine servicing, using the correct coolant is key. Toyota specifies Super Long Life Coolant (pink), normally supplied as a 50/50 premix. Service intervals commonly observed on late‑model Toyotas are up to 160,000 km or 10 years for the first change, then 80,000 km or 5 years thereafter, but owners should follow the exact interval in the Avensis owner’s handbook for their specific engine. Never top up with plain tap water, use premix or distilled water with the correct concentrate to maintain corrosion protection and freezing/boiling margins.

  • Every service: check for leaks, white crust at hose joints, damp end tanks, or a sweet smell. Make sure the coolant is clean and at the correct level in the reservoir.
  • If overheating, the heater blows cold at idle, or the coolant looks rusty or sludgy, get the system pressure‑tested and the cap checked. Don’t remove the cap when hot.
  • Radiator replacement tips: choose a quality unit (match engine code and transmission type), replace upper/lower hoses, clamps, and the radiator cap, and consider the thermostat at the same time. On autos, fit new O‑rings on trans cooler lines and top up/bleed the ATF if required.
  • Bleeding: refill slowly, run the engine with the heater on HOT, and purge air to avoid hot spots. After a road test, recheck levels once the engine is cool.

Handled with the right coolant and regular checks, the Avensis radiator will quietly keep temps in check for years, saving fuel, protecting the head gasket, and keeping those kilometres carefree across Aussie and Kiwi roads.

What coolant does a 2018 Toyota Avensis use?

The Avensis specifies Toyota Super Long Life Coolant (pink). It’s typically a 50/50 premix designed for alloy engines and long‑life service. If using concentrate, mix only with distilled or demineralised water. Sticking to the correct coolant chemistry protects the radiator, water pump, and heater core from corrosion and scale, and keeps operating temperatures stable in Aussie heat and frosty Kiwi mornings alike.

How often should the radiator coolant be changed on a 2018 Avensis?

Typical Toyota guidance for late‑model vehicles is up to 160,000 km or 10 years for the initial fill, then about every 80,000 km or 5 years. Always check the Avensis owner’s manual or Toyota service data for the engine fitted (petrol or diesel) and your market. Severe use (lots of short trips, heavy towing, dusty conditions) may justify earlier changes to keep additives fresh and the radiator clear.

Can the Avensis be driven with a leaking radiator?

Best not. Even a small leak can escalate, leading to overheating, warped heads, or a blown head gasket. If a top‑up is unavoidable to reach a safe spot, let the engine cool, add the correct coolant, and monitor the temperature closely. Then arrange repair pronto: fix the leak, replace any perished hoses or the cap, and bleed the system properly to avoid air locks.