Parts for your 2018 Subaru Exiga-Brake hose

2018 Subaru Exiga brake hose — purpose, care and when to replace

Per Subaru’s factory Service Manual for the Exiga/Crossover 7 (Brake section BR) and Subaru Technical Information System guidance, the 2018 Subaru Exiga runs a conventional hydraulic braking system with flexible brake hoses at each wheel. These hoses are therefore absolutely relevant to this model. Industry standards such as SAE J1401 for hydraulic brake hose assemblies also describe the construction and performance expected of the hoses fitted to vehicles like the Exiga.

The brake hose is the flexible link between the rigid steel brake pipe on the body and the moving caliper on the hub. It has to cope with steering and suspension travel while carrying high-pressure brake fluid without swelling, cracking or leaking. Quality hoses use multi-layer reinforcement to limit expansion, which helps maintain a firm pedal feel and consistent stopping power. On the Exiga, correct hose routing and clips keep the line clear of tyres and suspension components through the full range of motion.

As part of routine servicing, the brake hoses on a 2018 Subaru Exiga should be inspected for surface cracking, chafing, bulges, dampness at crimped joints, corrosion on end fittings, or any sign they’ve been twisted after previous work. Subaru service literature calls for regular visual checks and brake fluid replacement at the intervals stated in the owner’s/service manual