Your Selected Vehicle
Parts for your 2018 Honda Civic-Headlight bulbs
OEX Battery Master / Isolation Switch Off/On SPST (Contacts Rated 200A @ 12V) - ACX3410
Fitment Notes:
LED Autolamps 10/30V Amber Emergency Light Bar Clear Lens With Amber LEDs 10 Selectable Flash Patterns - LB1345ACM
Fitment Notes:
LED Autolamps 10/30V Amber Emergency Bar Clear Lens With Amber LEDs 19 Selectable Flash Patterns - LB964ACM
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
Fitment Notes:
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
Fitment Notes:
Drivetech 4x4 Rocker 4 Switch Panel On - Off - SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11030
Fitment Notes:
OEX 2.5mm 5 Core Trailer Cable, With Black Sheath - 30m Roll (NZ Ref.205) - ACX0820
Fitment Notes:
Replacement and Maintenance of Headlight Bulbs for Your 2018 Honda Civic
Replacing headlight bulbs is an essential aspect of maintaining your 2018 Honda Civic. Ensuring your headlights are in optimal condition is vital for both safe driving and compliance with vehicle regulations. Fortunately, this task does not demand extensive technical skills and can often be done with a few basic tools.
To kick things off, it's crucial to identify the type of headlight bulbs your Civic requires. Generally, the 2018 model uses H11 bulbs for low beams and 9005 bulbs for high beams. Always double-check your owner's manual or consult a professional if there's any doubt. The wrong bulb can affect visibility and may even lead to damage to the headlight assembly.
- Start by ensuring your car is parked on a level surface and the ignition is off for safety.
- Open the bonnet and locate the rear of the headlight assembly. It's typically straightforward to access, but you might need to move aside any components obstructing your reach.
- Cautiously disconnect the power connector from the bulb. This might require a gentle wiggle to free it.
- To remove the old bulb, twist it counterclockwise and carefully pull it out of the housing.
- Proceed by inserting the new bulb. Make sure not to touch the glass part with your fingers, as oils can shorten the lifespan of the bulb. If necessary, use a clean cloth or gloves while handling.
- Secure the new bulb by twisting it clockwise until it is snugly in place.
- Reconnect the power connector, ensuring it clicks back securely.
Once the replacement is complete, turn on your headlights to confirm everything is functioning correctly. If the new bulb doesn't light up, recheck the connections and bulb seating. It's a good practice to replace both bulbs at the same time to prevent uneven lighting, which can be distracting for you and other drivers.
Besides replacement, regular maintenance of your headlights is recommended. Over time, the headlight lens can become cloudy or yellowed, reducing the effectiveness of even the brightest bulbs. Use a headlight restoration kit to restore clarity and improve light dispersion. Additionally, verify the alignment of your headlights periodically. Misaligned beams can reduce road visibility and dazzle oncoming traffic.
Staying on top of your headlight health ensures better night driving visibility and enhances the overall safety of your vehicle. Whether you're embarking on a long journey or making frequent city commutes, properly functioning headlights are your eyes on the road.