Your Selected Vehicle
Parts for your 2018 Honda Civic-Headlight bulbs
OEX Crimp Terminal Female Blade Red Terminal Entry 2.8 x 0.8mm Vinyl 100 Pce - ACX3014
Fitment Notes:
Explore 4WD & Adventure
OEX Mini Relay 24V Change Over 15/20A 5 Pin - Resistor Protected, Sealed - ACX1943RBL
Fitment Notes:
OEX Black Nylon Cable Ties - 4.8mm x 200mm, with Mounting Hole - Pack of 25 - ACX1318-25
Fitment Notes:
OEX Engine Shut Down Solenoid 12V - Pull Rating 10.9Kg/cm2 1751 Series - ACX3338
Fitment Notes:
Great Whites Attack 25 inch Dual Row 36 LED Light Bar with Backlight - GWD5364
Fitment Notes:
Narva 12/24 Aeromax Amber LED Mini Light Bar Clear Lens Magnetic Mount - 85013AC
Fitment Notes:
OEX 6mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 30m Roll (NZ Ref. 157) - ACX0811
Fitment Notes:
LED Autolamps 12/24V Maxilamp Stop/Tail/Indicator/Reflector Single Lamp - MAXILAMP1XRE
Fitment Notes:
Stedi Hyper LED Flood Lights 14 Inch 120W 6000K Colour 10800 Lumens - LEDHYPR-14-120W
Fitment Notes:
Replacement and Maintenance of Headlight Bulbs for Your 2018 Honda Civic
Replacing headlight bulbs is an essential aspect of maintaining your 2018 Honda Civic. Ensuring your headlights are in optimal condition is vital for both safe driving and compliance with vehicle regulations. Fortunately, this task does not demand extensive technical skills and can often be done with a few basic tools.
To kick things off, it's crucial to identify the type of headlight bulbs your Civic requires. Generally, the 2018 model uses H11 bulbs for low beams and 9005 bulbs for high beams. Always double-check your owner's manual or consult a professional if there's any doubt. The wrong bulb can affect visibility and may even lead to damage to the headlight assembly.
- Start by ensuring your car is parked on a level surface and the ignition is off for safety.
- Open the bonnet and locate the rear of the headlight assembly. It's typically straightforward to access, but you might need to move aside any components obstructing your reach.
- Cautiously disconnect the power connector from the bulb. This might require a gentle wiggle to free it.
- To remove the old bulb, twist it counterclockwise and carefully pull it out of the housing.
- Proceed by inserting the new bulb. Make sure not to touch the glass part with your fingers, as oils can shorten the lifespan of the bulb. If necessary, use a clean cloth or gloves while handling.
- Secure the new bulb by twisting it clockwise until it is snugly in place.
- Reconnect the power connector, ensuring it clicks back securely.
Once the replacement is complete, turn on your headlights to confirm everything is functioning correctly. If the new bulb doesn't light up, recheck the connections and bulb seating. It's a good practice to replace both bulbs at the same time to prevent uneven lighting, which can be distracting for you and other drivers.
Besides replacement, regular maintenance of your headlights is recommended. Over time, the headlight lens can become cloudy or yellowed, reducing the effectiveness of even the brightest bulbs. Use a headlight restoration kit to restore clarity and improve light dispersion. Additionally, verify the alignment of your headlights periodically. Misaligned beams can reduce road visibility and dazzle oncoming traffic.
Staying on top of your headlight health ensures better night driving visibility and enhances the overall safety of your vehicle. Whether you're embarking on a long journey or making frequent city commutes, properly functioning headlights are your eyes on the road.