Parts for your 2018 Holden Captiva 7-Wheel hubs

2018 Holden Captiva 7 wheel hubs — what they do and how to look after them

Wheel hubs are absolutely fitted to the 2018 Holden Captiva 7. This is confirmed by the Holden/GM Captiva (CG Series II/MY18) service manual procedures for “Front/Rear Wheel Hub and Bearing Replacement,” the GM EPC listings that show complete hub-and-bearing assemblies for both axles, and parts catalogues from ACDelco, Timken, NSK and SKF that list direct-fit hub units for 2016–2018 Captiva models. So wheel hubs are relevant to this vehicle’s servicing and repairs.

On the Captiva 7, each hub is a sealed hub-and-bearing assembly that supports the wheel, provides the mounting face for the rotor and wheel, and (on driven wheels) mates with the CV shaft via a splined centre. Most units integrate the ABS tone ring or encoder, so the wheel speed sensor reads directly from the hub. That sealed design means no periodic greasing