Parts for your 2017 Toyota Vitz|yaris-Driveshafts

2017 Toyota Vitz/Yaris driveshafts

Driveshafts are absolutely relevant on the 2017 Toyota Vitz/Yaris. Technical sources such as the Toyota Repair Manual for the XP130 series and the Toyota Electronic Parts Catalogue list a “front drive shaft sub‑assembly” for both left and right sides, confirming the car uses a pair of front CV axle shafts to drive the wheels. Some Japan‑market Vitz models were available with 4WD and add a propeller shaft to the rear, but Australian and New Zealand 2017 Yaris models are front‑wheel drive only and use the two front driveshafts.

On the 2017 Toyota Vitz/Yaris, the front driveshafts (often called CV axles) take engine torque from the transaxle and deliver it to the front wheels while allowing for steering and suspension movement. Each shaft has inner and outer constant‑velocity (CV) joints, packed with grease and protected by flexible rubber boots. When these are healthy, power delivery is smooth and quiet.

There’s no fixed replacement interval for driveshafts