Parts for your 2017 Toyota Vitz|yaris-Brake shoes

2017 Toyota Vitz/Yaris Brake Shoes

Based on technical sources including the Toyota Repair Manual for the XP130 series (Vitz/Yaris), Toyota Electronic Parts Catalogue (EPC) listings for KSP130/NCP130/NCP131, and major aftermarket catalogues (e.g., Bendix and Bosch), the 2017 Toyota Vitz/Yaris is commonly fitted with rear drum brakes that use brake shoes. Some higher-spec variants in certain markets may have rear discs, but most 1.0–1.3 litre trims use rear brake shoes. Always confirm by VIN or a quick visual check of the rear brakes.

On the 2017 Vitz/Yaris, brake shoes sit inside the rear drums and press outward to create friction, slowing the car while also serving the park brake function. They’re robust, relatively low-maintenance, and well suited to daily commuting around Aotearoa and Australia.

• Purpose: Provide reliable rear braking and strong handbrake hold via an internal drum mechanism.
• Strengths: Good durability, sealed design to resist road grime, and predictable performance.
• Typical signs they need attention: Reduced handbrake hold, pulsing or scraping at low speed, longer stopping distances, or a soft pedal from leaking wheel cylinders.

As part of routine servicing, a mechanic should remove the rear drums and inspect the shoe lining thickness, drum condition, and wheel cylinders, then clean out brake dust and verify the self-adjusters move freely. Many workshops in AU/NZ check these every 20,000 km or 12 months, sooner if the vehicle tows, carries loads, or drives hilly routes.

Replace the shoes when the friction material is near the wear limit (often around 1.5–2.0 mm of lining remaining), when they’re oil-contaminated, or if the lining is cracked or glazed. It’s smart practice to replace shoes in axle pairs and fit a new hardware/spring kit to restore proper return and adjustment. Drums should be measured for diameter