Parts for your 2017 Subaru Exiga-Headlights

2017 Subaru Exiga headlights — purpose, care and replacement

Headlights are absolutely fitted to the 2017 Subaru Exiga (including the Crossover 7). This is supported by Subaru’s owner’s manuals and parts catalogues for the Exiga series, which list complete headlamp assemblies, bulbs and ballasts for that model year. It also aligns with road standards like ADR 13/00 and NZ WOF lighting requirements that mandate dipped (low) and main (high) beams on road-registered vehicles. So yes—headlights are very much relevant on a 2017 Subaru Exiga.

On this seven-seater, the headlights do the heavy lifting after dark and in poor weather—projecting a clear, well-shaped beam to help the driver see and be seen without dazzling oncoming traffic. Depending on trim and market, the Exiga runs either halogen bulbs (commonly H11 low beam, HB3 high beam) or factory HID/Xenon projectors (often D4S) with auto-levelling. Either way, they’re designed for compliant, reliable lighting that meets ECE/ADR-style beam patterns.

As part of regular servicing, it pays to give the Exiga’s headlights a quick once-over. Replace bulbs in pairs to keep beam colour and brightness even. For halogens, handle new globes with clean gloves to avoid skin oils shortening bulb life. HID systems involve high voltage—leave ballast and burner work to a qualified tech. If the lenses are hazy, a proper restore kit can bring back clarity and light output. After any front-end repair, suspension change or cargo/towing load change, check aim to avoid under- or over-illumination. Always use ADR/ECE-approved bulbs, ultra‑high wattage or off‑road-only options can overheat housings and fail inspections.

• Inspect lens clarity and beam pattern every 10,000 km or 6 months.
• Confirm bulb types via the owner’s manual or the markings on the lamp caps.
• Clean connectors and check earth points to prevent flicker or intermittent operation.
• Replace blown fuses with the correct rating only.
• Avoid touching HID/halogen glass, use gloves or a clean tissue.
• If water ingress is spotted, address seals promptly to protect reflectors and electronics.

A tidy headlight setup on the 2017 Subaru Exiga keeps night drives relaxed, helps it sail through WOF or rego checks, and protects the housings from heat and moisture damage over time.

Popular questions about 2017 Subaru Exiga headlights

What bulb types fit a 2017 Subaru Exiga?
Many Exiga trims use halogen H11 for low beam and HB3 (9005) for high beam. Higher-spec Japanese domestic trims can run HID/Xenon low beams, commonly D4S, with halogen highs. Always confirm against the vehicle’s owner’s manual or the embossed markings on the rear dust caps before buying.

Are LED retrofit bulbs legal on this model?
Across Australia and New Zealand, LED retrofit bulbs in halogen housings are generally not road-legal unless the complete headlamp assembly is certified to the relevant ADR/ECE standard. If an LED upgrade is desired, look for fully approved replacement assemblies and check local state/territory or NZTA guidance.

How often should headlight aim be checked?
Check aim at least annually, and any time bulbs are replaced, after front-end repairs, or if the car frequently tows or carries heavy loads. Proper alignment improves visibility and reduces glare for other road users.