Parts for your 2017 Nissan Serena-Wheel bearings

Understanding Wheel Bearings on the 2017 Nissan Serena

The 2017 Nissan Serena is a popular multi-purpose vehicle known for its spacious interior, comfort, and reliability. When it comes to the mechanical components that keep the Serena running smoothly, wheel bearings play an important role, just like in most modern vehicles.

Wheel bearings are a critical part of the Serena's suspension system. They allow the wheels to rotate freely with minimal friction while supporting the weight of the vehicle. The 2017 Nissan Serena uses wheel bearings that are integrated into the wheel hub assembly, which means the bearings are designed as part of the hub unit rather than separate components. This setup is common in many cars today as it simplifies assembly and maintenance.

The purpose of wheel bearings is pretty straightforward, but really essential. They provide a smooth rotation for the wheels by reducing friction between the wheel hub and the axle. Without proper functioning wheel bearings, driving the Serena would be noisy, rough, and less safe due to unstable wheel movement. The wheel bearings ensure the vehicle maintains steady handling and stability while on the road.

Over time, wheel bearings are subjected to wear and tear from factors like road conditions, weather changes, and the general mileage of the vehicle. For a 2017 Nissan Serena, wheel bearing wear is something to keep an eye on during regular vehicle servicing, especially if noticeable symptoms start to show up.

Signs that the wheel bearings might need attention include:

• A humming or rumbling noise coming from the wheels, especially while driving at higher speeds.
• Vibration or wobbling coming through the steering wheel.
• Uneven tyre wear or a feeling that the vehicle isn't as smooth when cornering.
• In severe cases, play or looseness in the wheel hub when the wheel is rocked side to side.

It is important to address wheel bearings issues promptly. Ignoring worn wheel bearings on the 2017 Nissan Serena can lead to increased friction and heat, causing premature failure of the bearing itself or even damage to other suspension components. Driving long-term with faulty wheel bearings can also affect braking performance and overall safety.

When it comes to replacing or servicing the wheel bearings on the 2017 Nissan Serena, the process usually involves removing the entire wheel hub assembly. Since the bearings are integrated with the hub, the old bearing usually cannot be replaced separately. Mechanics typically replace the whole hub assembly if the bearings are worn out or noisy.

Servicing the wheel bearings as part of routine maintenance is recommended every 100,000 kilometres or according to the guidelines found in the Serena's owner manual. However, conditions such as frequent driving on rough roads, exposure to water or mud, and heavy loads can shorten the lifespan of the wheel bearings and call for earlier inspection.

To extend the life of the wheel bearings and maintain the Nissan Serena's performance, a few simple tips are handy:

• Regularly inspect the wheels and listen for unusual noises during driving.
• Maintain correct wheel alignment and tyre pressure to reduce stress on the bearings.
• Avoid deep potholes or rough terrain when possible.
• Follow all recommended service intervals and have a qualified mechanic check for play or roughness in the wheel hubs.

In summary, the 2017 Nissan Serena definitely relies on wheel bearings as an integral component that allows for smooth, safe wheel rotation. The bearings are housed within the hub assembly and require careful inspection and timely replacement to keep the vehicle running at its best. While the task of addressing wheel bearings might seem minor, it ensures comfort, safety, and longevity for the Serena owner behind the wheel.