Parts for your 2017 Mazda Cx-5-Pedal pads

2017 Mazda CX-5 Pedal Pads

Based on Mazda’s technical documentation—the Mazda CX-5 (KF, 2017–) Electronic Parts Catalogue and the Mazda Workshop Manual—this model does use pedal pads. There’s a separate rubber pad on the brake pedal across all variants, and manual-transmission models also have a rubber clutch pedal pad. The accelerator is an electronic pedal module with an integrated tread surface, so there’s no separate accelerator “pad” to replace.

On the 2017 CX-5, pedal pads are there for grip, comfort, and consistency. The textured rubber on the brake (and clutch, where fitted) helps the driver maintain solid foot contact, especially in the wet, reducing the chance of a slip at a critical moment. Because they’re a contact surface, these pads wear over time. The good news: they’re inexpensive service items and designed to be replaced without fuss.

Typical reasons to replace a pedal pad include noticeable smoothing of the tread, cracking or hardening of the rubber, edges curling away from the metal pedal, or any sign the foot could slip. In AU and NZ, a badly worn or missing brake pedal pad can attract attention at a roadworthy or WOF inspection because it’s a basic safety item.

• Keep pads clean: wash with mild soap and water, dry thoroughly.
• Avoid silicone or glossy dressings that can make the pad slippery.
• After beach trips, heavy rain, or muddy tracks, check for embedded grit that can accelerate wear.

1. For replacement, pull the old pad off the pedal plate (it’s a snug rubber fit).
2. Warm the new pad slightly (room temperature is fine) to make it more pliable.
3. Hook the top lip over the pedal, then work around the edges until it seats fully with no gaps.

There’s no fixed kilometre interval—pads are replaced on condition. Many owners find the brake pad lasts years, but higher city mileage, heavy work boots, or off-road use can speed up wear. Choosing an OEM-spec pad ensures correct fit and rubber hardness so the feel matches what Mazda intended. For manual models, it’s smart to replace brake and clutch pads together so the grip level is consistent across both pedals.

Popular questions about 2017 Mazda CX-5 pedal pads

Does the 2017 CX-5 have pedal pads on all pedals?
The brake pedal has a separate rubber pad on all 2017 CX-5 variants. Manual models also have a clutch pedal pad. The accelerator is an electronic pedal assembly with an integrated surface, so there’s no separate pad to swap out.

How often should pedal pads be replaced?
There’s no set schedule. Replace when the rubber is smooth, cracked, hard, loose, or slippery—especially if shoes can slide when wet. Many vehicles go years before needing a new pad, but high stop–start use can shorten that timeframe.

Could a worn brake pedal pad affect a WOF or roadworthy?
Yes. Inspectors expect a secure, non-slip brake pedal surface. A missing or excessively worn pad can be flagged during a WOF (NZ) or roadworthy inspection (AU), so replacing it promptly is good practice.