Parts for your 2017 Holden Barina-Tail lights

2017 Holden Barina tail-lights: purpose, care and replacement

Tail-lights are absolutely fitted to the 2017 Holden Barina (TM series). This is confirmed in the Holden Barina Owner’s Manual (lighting and bulb replacement sections for the 2017 TM), the GM Global Service Information for TM Barina rear combination lamps, and Australia/New Zealand regulations. Australian Design Rules (notably ADR 13/00 for lighting installation and ADR 49/00 for rear position/stop lamps) and NZTA requirements mandate operational rear position and stop lamps on passenger cars, so tail-lights are both relevant and required on this vehicle. Genuine and aftermarket parts catalogues also list left and right rear combination lamp assemblies and replacement bulbs specifically for the 2017 Barina.

On the 2017 Barina, the rear combination lamp handles multiple jobs: a steady red tail light for night driving, a brighter red brake light to warn following traffic, amber indicators for turns and hazards, and a white reverse light for backing up. It’s simple, reliable hardware that keeps the Barina visible and communicative in all conditions, from city commutes to rainy motorway runs.

As part of regular servicing, a quick tail-light check pays off. They should:

• Illuminate evenly on both sides, with no flicker or dimming
• Show correct colours (red tail/stop, amber indicator, white reverse)
• Be free of cracks, moisture, or heavy haze in the lens

Replacement is straightforward on most Barina trims using serviceable bulbs. Open the hatch or boot, remove the trim access panel, undo the retaining fasteners, and gently withdraw the lamp. Twist out the bulb holder, swap the bulb for the correct wattage and base type, avoid touching the glass with bare fingers, and reassemble. If a variant uses LED boards within the lamp, the fix for a failed LED is typically a complete lamp assembly replacement rather than a bulb. After refitting, test tail, brake, indicator, and reverse functions, and check the relevant fuse and earth if anything stays dark.

Keep lenses clean with a mild car wash solution—harsh cleaners can mar the plastic and dull output. If condensation appears, inspect the rear housing seal and vents