Parts for your 2016 Toyota Crown-Suspension bushes

2016 Toyota Crown Suspension Bushes

According to Toyota’s Electronic Parts Catalogue (EPC) for the S210 Crown (2013–2018) and the Toyota Repair Manual suspension sections, the 2016 Toyota Crown is fitted with a range of suspension bushes. These include control arm bushes, stabiliser (sway) bar D-bushes and link bushes, plus front and rear suspension member/subframe mounts. So suspension bushes are absolutely relevant to this model.

On a Crown, bushes are the quiet achievers. They isolate noise and vibration, allow controlled movement of arms and links, and keep alignment angles stable under braking, cornering and bumps. That translates to the calm, planted ride the Crown is known for across Aussie and Kiwi roads.

• Front lower control arm bushes (compliance and rear pivots)
• Rear multi-link arm bushes (toe, upper/lower control, trailing)
• Stabiliser bar D-bushes and link bushes, front and rear
• Front and rear suspension member/subframe mounting bushes

As part of routine servicing, it’s smart to have the bushes inspected every 15,000–20,000 km or 12 months. Look for perishing, cracking, separation, ovalised sleeves, or excessive movement under a pry-bar check. Road test clues include clunks over sharp bumps, steering shimmy, rear-end steer, instability under braking and uneven tyre wear.

Bushes aren’t usually replaced on a time schedule