Skip to content Skip to navigation menu

Your Selected Vehicle

Categories

  • 4wd, Adventure & Escape
  • 4wd Recovery Gear

Brands

Price

Parts for your 2016 Subaru Legacy-Suspension bushes

Sort by
Showing 1 - 2 of 2 products

2016 Subaru Legacy suspension bushes: what they do and when to replace them

Based on Subaru’s 2015–2019 Legacy/Outback Service Manual (Chassis: Front and Rear Suspension) and the OEM parts catalogue diagrams for the control arms, crossmembers and stabiliser bars, the 2016 Subaru Legacy is absolutely fitted with multiple suspension bushes, including hydraulic front lower control arm bushes. These components are standard across the platform, not optional extras.

On the 2016 Legacy, suspension bushes sit at the pivot points of arms and bars, isolating vibration while keeping geometry tight. Up front there’s a MacPherson strut layout with lower control arm bushes (the rear bush is typically hydraulic/fluid-filled to calm harshness). Down the back, the double-wishbone/multi-link arrangement uses several bushes to control toe, camber and compliance. Sway bar (stabiliser) D-bushes and link bushes keep body roll in check without adding extra noise.

When these bushes age, the rubber can crack, split, or in hydraulic types, seep fluid. That leads to vagueness, clunks and uneven tyre wear. Owners often notice:

  • Steering shimmy or tramlining over rough roads
  • Thuds on take-off, braking or over speed bumps
  • Wandering alignment or accelerated inner/outer tyre wear

For Aussie and Kiwi conditions, it’s smart to have bushes inspected at each service or at least every 15,000 km, and definitely at WOF/rego time. Many last 80,000–160,000 km, but gravel roads, heat, and heavy loads can shorten that. If the big front compliance bush is leaking or badly cracked, replacement is the go.

Replacement options include pressing in new bushes or fitting complete arms. Complete arms can save labour and ensure new ball joints where applicable. After any bush or arm change, a proper four-wheel alignment is essential to restore handling and tyre life. Torque fasteners at ride height to avoid preloading new bushes. Stick with quality OE-style rubber or reputable polyurethane where appropriate