Your Selected Vehicle
Parts for your 2016 Subaru Impreza-Fuel injectors
Explore 4WD & Adventure
2016 Subaru Impreza fuel injectors — what they do and how to look after them
Fuel injectors are absolutely fitted to the 2016 Subaru Impreza. Technical sources including the Subaru Service Manual via the Subaru Technical Information System (STIS) for the 2012–2016 GP/GJ Impreza (Engine, FU: Fuel Injection) describe a sequential multi‑point fuel injection system using electrically controlled injectors on the 2.0‑litre FB20 petrol engine. Subaru parts catalogues for the FB20 list the injectors, seals and rails, and trade references such as Autodata/AllData identify the system as sequential multi‑port fuel injection. So yes — fuel injectors are relevant to this model.
On the 2016 Impreza, the injectors meter and atomise petrol into each intake port, timed precisely by the engine control unit. That sharp spray pattern helps cold starts, smooth idle, snappy throttle response and clean emissions. Because this FB20 uses port injection (not direct injection), the back of the intake valves also gets a wash of fuel, which tends to keep them cleaner than some GDI engines.
There’s no fixed replacement interval for injectors on this model — they’re a “inspect and test as needed” item. During regular servicing, a good workshop will scan for misfire and fuel‑trim codes, listen for an even injector tick, and check for any fuel odour around the rail. If the rail is ever removed, new upper and lower O‑rings and insulators should be fitted, lightly lubricated, and rail bolts torqued correctly. Always depressurise the fuel system before cracking lines, then leak‑check on restart.
If the Impreza’s starting to feel a bit doughy off the line, using more petrol than usual, idling rough, or throwing codes like P0201–P0204 or lean/rich trim faults, an injector balance test and flow check can pinpoint a lazy or leaking unit. Sticking pintles and tired spray patterns are common with age or contaminated fuel. In many cases, professional ultrasonic cleaning and flow‑matching can restore performance
