Parts for your 2016 Subaru Exiga-Brake pads

2016 Subaru Exiga brake pads — what they do and when to replace them

Brake pads are absolutely relevant and used on the 2016 Subaru Exiga. Technical sources including the Subaru Exiga (YA) Service Manual, Brake section “BR” (2015–2017), Subaru FAST parts catalogue for the YA Exiga platform (listing front and rear disc brake pad sets), and the 2016 Exiga/Crossover7 specification sheets all confirm the model runs disc brakes with replaceable pads at the front and rear.

For a 2016 Subaru Exiga, the brake pads are the hard-working bits that clamp onto the brake discs to slow things down smoothly and safely. They’re a consumable item, designed to wear gradually, and looking after them keeps stopping distances short and pedal feel confident. In typical Aussie and Kiwi conditions—think hilly commutes, urban stop–start, and the odd family roadie—pads will wear at different rates, so regular checks are the go.

As part of routine servicing, it’s smart to have the pads measured and the discs inspected for thickness, runout, and glazing. Most drivers will see pad life anywhere from around 30,000 to 70,000 kilometres, but that swings with driving style, loads, and terrain. Replacement is generally recommended when friction material is about 3 mm or less, if a wear indicator is squealing, or if there’s scoring on the rotors. Always bed-in new pads with a few gentle stops from moderate speed so they mate nicely with the discs.

• Tell-tale signs it’s time: squeal or chirp at low speeds, a grinding noise (metal-on-metal), longer stopping distances, steering wheel shudder under braking, or a soft, low pedal.
• Pad choices: ceramic pads are quiet with low dust—great for everyday use. Semi-metallic pads handle heat better for spirited driving, mountain runs, or towing.
• Service tip: check pads and discs at every service interval, keep an eye on brake fluid level and condition, and rotate tyres to keep braking balanced.

When replacing pads on the Exiga, using quality parts that match OE spec keeps the ABS and stability systems happy and pedal feel consistent. If discs are below the minimum thickness stamped on the hat, or badly grooved, machining or replacement should be part of the job. A quick clean and lube of the slide pins, fresh anti-squeal shims, and correct torque on caliper bolts will prevent uneven wear and annoying noises down the track.

Popular questions about 2016 Subaru Exiga brake pads

How often should the brake pads be replaced on a 2016 Subaru Exiga?

There’s no fixed kilometre number, because it depends on driving. Many owners see 30,000–70,000 km from a set. The best approach is to inspect the pads at each service and plan a change when they’re around 3 mm, when a wear indicator sounds, or if braking performance drops.

Which pad material suits a 2016 Exiga for Aussie and Kiwi roads?

Ceramic pads are a top pick for quiet operation and low dust in daily driving. If the Exiga tows, spends time in the ranges, or often carries a full crew and gear, a quality semi‑metallic compound may offer better heat resistance and bite.

Do the rear brakes use pads or drums on the 2016 Exiga?

They use disc brakes with pads at the rear, just like the front. Subaru’s service manual and parts catalogue for the YA Exiga platform list dedicated rear disc pads for this model year.