Parts for your 2016 Ford Escape-Clutch kit

2016 Ford Escape clutch kit — is it relevant?

For a 2016 Ford Escape, a traditional clutch kit isn’t applicable. This model was factory-fitted with a 6-speed 6F35 torque‑converter automatic transmission (often branded SelectShift), which doesn’t use a manual-style friction clutch disc, pressure plate, or release bearing. That’s why a clutch kit isn’t listed as a service or replacement item for this vehicle.

Why it isn’t used: the 6F35 automatic couples the engine to the gearbox via a torque converter and uses internal multi-plate clutches inside the transmission to select gears. Those internal clutches are part of the transmission assembly and aren’t serviced as a separate “clutch kit.” There’s no clutch pedal and no external clutch hardware to replace. The model also wasn’t equipped with a dual‑clutch transmission in this year, so there’s no DCT-style clutch pack to service either.

Regional note for Aussies and Kiwis: the 2016 equivalent sold locally was badged Ford Kuga, and a handful of Kuga variants offered a manual gearbox that does use a conventional clutch kit. But the 2016 Ford Escape nameplate (as sold in North America) is automatic-only, and a clutch kit doesn’t apply. If someone’s driving a used import that’s actually an Escape, the same automatic-only setup holds true.

What to service instead on a 2016 Escape:

• Automatic transmission fluid (ATF): use the specified Mercon LV fluid. Many workshops recommend a fluid exchange around 60,000–100,000 km, or sooner with towing, heat, or stop–start use.
• AWD driveline (if fitted): change Power Transfer Unit (PTU) and Rear Drive Unit (RDU) fluids on condition or at conservative intervals to reduce wear and heat issues.
• Software and diagnostics: keep TCM/PCM calibrations current and scan for shift or pressure codes if it feels like it’s “slipping.”

Technical sources referenced: 2016 Ford Escape Owner’s Manual (transmission/controls sections showing automatic-only operation and no clutch pedal), Ford Workshop Manual (Section 307-01 for the 6F35 automatic specifying Mercon LV and internal clutch operation), and Ford model specification sheets listing 6F35 as the transmission for 2016 Escape trims.

• Does a 2016 Ford Escape have a clutch kit? No. It runs a 6F35 torque‑converter automatic, so there’s no conventional clutch disc or pressure plate to replace. A clutch kit only applies to manual Kuga variants from the same era, not the Escape automatic.
• What fluid should the 2016 Escape use, and when should it be changed? The 6F35 specifies Mercon LV ATF. Follow your service schedule