Your Selected Vehicle
Parts for your 2015 Nissan Pathfinder-Headlights
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
2015 Nissan Pathfinder headlights
Headlights are absolutely fitted to the 2015 Nissan Pathfinder (R52). Technical sources including the 2015 Pathfinder Owner’s Manual, the Nissan Factory Service Manual for R52, and lighting standards such as ADR 13/00 and ADR 46/00 (and US FMVSS 108) confirm that compliant headlamps are standard equipment. They’re not optional, and they’re essential for road legality and night-time visibility.
On this model, the headlights provide forward illumination for low- and high-beam, plus forward signalling via indicators and parking lamps. Depending on trim and market, units are typically projector-style halogen for low beam with separate high beam, and many variants add daytime running lamps. The setup is designed to light the road without dazzling oncoming traffic, meet local compliance, and handle the rough-and-tumble of Aussie and Kiwi conditions, from country highways to urban commutes.
As part of routine servicing, the Pathfinder’s headlights deserve a quick once-over. Owners should expect reliable performance if lenses stay clear, wiring remains intact, and bulbs are replaced with the correct spec. Tell-tales like dim output, one side out, condensation inside the housing, or a yellowed lens point to maintenance needs. Sticking with ADR-compliant replacement bulbs and avoiding over-wattage options helps protect the wiring and reflectors. Before a rego check or WoF, a beam aim check is smart to avoid fails and improve night driving confidence.
- Inspect lens clarity and seals every 10,000–15,000 kilometres or at each service.
- Clean lenses with car wash soap, use a reputable restoration kit if UV haze appears.
- Replace bulbs in pairs for balanced brightness, never touch the glass with bare fingers.
- Confirm the correct bulb types for the specific trim/market in the Owner’s Manual or under-bonnet labels.
- Check relevant fuses and connectors if a lamp is out, avoid higher-wattage bulbs that can overheat housings.
- Verify headlight aim on level ground after any bulb or housing change.
- If moisture is present, inspect vents and seals, persistent fogging may require a new housing.
Popular questions
What bulb types does the 2015 Pathfinder use?
Bulb types vary by trim and market. Many R52 Pathfinders use projector-style halogen low beams with a separate halogen high beam, while some higher trims may feature HID/Xenon low beams. The safest approach is to check the Owner’s Manual or the bulb chart label in the engine bay for the exact codes. Using the specified, ADR-compliant bulbs maintains proper beam pattern and avoids heat damage.
How can owners fix cloudy or yellow headlights?
UV haze can be improved with a quality headlight restoration kit that sands, polishes, and seals the lens. If the lens is cracked or the internal reflector is dull, replacement of the full assembly is the better long-term fix. Applying a UV sealant after restoration helps slow future yellowing, especially in strong Aussie and NZ sun.
Can the headlight aim be adjusted?
Yes. The Pathfinder’s housings include adjusters for vertical (and in some cases horizontal) aim. On level ground with correct tyre pressures and normal load, adjust until the cut-off meets the guide marks recommended in the service literature. If unsure, a workshop can aim the lights quickly with a beam setter to meet ADR alignment expectations.