Your Selected Vehicle
Parts for your 2015 Honda Cr-v-Headlights
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps Front Marker LED White With Reflector 12-24V Perm Mnt - EU38WMHD
Explore 4WD & Adventure
LED Autolamps 10/30V Front Outline Position Marker 4 White LEDs With 40cm Wire - 35WM
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
2015 Honda CR‑V Headlights — Purpose, Care and Replacement
Headlights are absolutely relevant and fitted to the 2015 Honda CR‑V. Technical sources including the 2015 Honda CR‑V Owner’s Manual (bulb specifications and lighting controls), Honda service information, and Australian/New Zealand road standards (ADR 13/00, ADR 46/00, NZ Land Transport lighting requirements) specify that compliant headlamps are mandatory equipment. So yes — this model uses headlights, and they’re essential for safe, legal driving.
On the road, the CR‑V’s headlights do more than tick a box. They provide forward illumination at night and in poor weather, make the vehicle visible to others, and define the beam pattern to suit right‑hand‑drive conditions in Australia and New Zealand without dazzling oncoming traffic. They also integrate with daytime running lights and the indicator system to help other road users judge speed and distance.
Most 2015 CR‑V variants in AU/NZ are equipped with halogen projector low beams and halogen reflector high beams. Common globe types are H11 (low beam, 12V 55W) and HB3/9005 (high beam, 12V 60W), but owners should confirm against the vehicle’s handbook or the under‑bonnet label because trim levels and regional specs can differ.
Good servicing keeps the light output strong and the beam correctly aimed. Practical tips include:
- Inspect at each service or every 10,000 km for dimming, colour shift, cloudy lenses, or moisture inside the housing.
- Replace globes in pairs, halogens naturally dim over time. Avoid touching the glass — use clean gloves.
- Check fuses and the headlight relay if a lamp won’t power up, verify earth connections for corrosion.
- Clean and protect lenses. Light yellowing can often be restored, deep crazing or cracked housings should be replaced.
- Verify aim after any replacement or front‑end work. An incorrect beam can fail a WoF/rego check and reduce night visibility.
For many owners, quality OEM‑equivalent halogen globes balance brightness, lifespan and compliance. If considering LED or HID upgrades, choose components certified to ADR/UNECE standards for the CR‑V’s housing and get the aim professionally set. Keeping the headlights in top nick is a small job that pays off every night, every kilometre.
Popular questions about 2015 Honda CR‑V headlights
What headlight globes fit a 2015 Honda CR‑V in Australia or New Zealand?
Most models use H11 for low beam and HB3/9005 for high beam. Because trims can vary, it’s smart to confirm against the owner’s manual or a parts catalogue by VIN. Matching the correct wattage and cap type keeps the beam pattern legal and the wiring happy.
How often should the CR‑V’s headlight globes be replaced?
Halogen globes slowly dim before they fail. Checking output at every service and replacing in pairs when one blows, or when output noticeably drops, is a safe bet. Many drivers find three to five years typical, depending on night driving and vibration.
Are LED headlight upgrades legal on a 2015 CR‑V?
Drop‑in LED globes in halogen housings may not meet ADR/NZ compliance. If upgrading, use approved assemblies or components certified for the CR‑V’s optics, and have the beam aim set correctly. Non‑compliant lights can fail WoF/rego and dazzle other drivers.