Parts for your 2015 Ford Mondeo-Exhaust gasket

2015 Ford Mondeo Exhaust Gasket

Based on Ford’s technical literature for the 2015 Mondeo (CD391/MD), exhaust gaskets are fitted and relevant on this model. The Ford Workshop Manual (WSM) sections covering exhaust system, turbocharger and DPF/CAT service procedures note the use of new gaskets and sealing rings whenever joints are disturbed, and the Ford parts catalogue (EPC/Microcat) lists multiple exhaust gaskets for the 2.0 EcoBoost and 2.0 TDCi variants, including turbo-to-cylinder head, turbo outlet-to-downpipe, DPF-to-pipe and rear flange joints. So yes, an exhaust gasket is very much part of this Mondeo’s exhaust architecture.

The job of an exhaust gasket is to keep hot exhaust gases inside the system where they belong. At the manifold, turbo and pipe flanges, these metal or composite gaskets seal joins, maintain proper backpressure, protect sensors and the cabin from fumes, and prevent that annoying tick or chuff on cold starts. On EcoBoost models the exhaust manifold is integrated into the head, but there’s still a gasketed interface at the turbo inlet and a sealed V-band or ring at the turbo outlet. Diesel models use gaskets at manifold and DPF joints too.

There’s no set service interval for exhaust gaskets