Parts for your 2014 Toyota Vitz|yaris-Wheel hubs

2014 Toyota Vitz/Yaris Wheel Hubs: Purpose, Care, and When to Replace

Yes, wheel hubs are absolutely used on the 2014 Toyota Vitz/Yaris. Toyota’s factory Repair Manual for the XP130 series, the New Car Features guide, and the Toyota Electronic Parts Catalogue all list front “axle hub sub-assemblies with bearing” and rear “axle hub and bearing” units (drum or disc variants, with ABS tone rings). That makes wheel hubs a relevant, standard component on this model.

On a 2014 Vitz/Yaris, the hub is the central mounting point that the wheel bolts onto via the studs. It houses a sealed bearing that lets the wheel spin smoothly, keeps brake rotors or drums running true, and, on ABS-equipped cars, carries the tone ring or magnetic encoder for the wheel speed sensor. Up front, it also transmits drive from the CV shaft. When the hub/bearing is in good nick, steering feels precise, tyres wear evenly, and braking is stable.

There’s no periodic greasing because the bearing is sealed for life. During routine servicing, a tech should check for noise, roughness, or play, inspect stud condition, ensure the mounting face is clean and flat, and confirm the ABS wiring/connector is secure. Correct wheel-nut torque is critical