Your Selected Vehicle
Parts for your 2014 Subaru Legacy-Tail lights
LED Autolamps 12V LED Boat Trailer Lamps Stop/Tail/Indicator with Licence Plate Lamp Light Left & Right Side, with 8m cable, Twin Blister - 209GARLP2/8M
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Licence LED Light With 4 Pin Plug - 99ARLM4P
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V LED Rear Combination Stop/Tail/Indicator/Reverse Light with Reflectors, Blister Pack - 250ARWM
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reflector Light 28cm Cable Blister Pack - 275MAR
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail Lamp With Red Lens Round With Grommet/Plug - 113RMG
Fitment Notes:
LED Autolamps 12/24V Round Stop/Tail Lamp With Clear Lens 130mm Diameter Recessed Mount Blister Pack - 102RCM
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator/Reverse LED Light Blister Pack - 280ARWM
Fitment Notes:
LED Autolamps 12/24V LED MaxiLamp Stop/Tail/Indicator/Reflector Light Round Blister Pack - MAXILAMP1XC
Fitment Notes:
LED Autolamps 12V Stop/Tail/Ind/Rev LED Light Kit 450mm Loom DT04 Connector - SO282ARWM2LR450
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator Light Clear Lens Coloured LEDs Surface Mount - 12ARM-2
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
Fitment Notes:
Repco 12V LED Rear Combination Lamp Stop / Tail / Indicator Pair 150x80x25mm - RLT150BL2S3
Fitment Notes:
Tail Lights on the 2014 Subaru Legacy: Purpose, Maintenance, and Replacement Tips
The 2014 Subaru Legacy, like most vehicles on the road, comes equipped with tail lights as an essential part of its lighting system. Tail lights serve a critical role in ensuring safety and visibility for the vehicle, especially during low light conditions, rain, fog, or nighttime driving. They are mounted on the rear of the car and are designed to illuminate whenever the headlights are turned on, signalling the presence of the vehicle to other drivers on the road.
Tail lights on the 2014 Subaru Legacy are the bright red lights you see at the back of the car. They are crucial in helping prevent rear-end collisions by making the vehicle clearly visible from behind, giving drivers behind enough notice to react appropriately. When the brakes are applied, the tail lights typically glow brighter through the brake light functionality, further warning drivers that the car ahead is slowing down or stopping. Additionally, tail lights often include integrated rear indicators or turn signals, which flash to indicate the driver's intent to turn or change lanes.
From a technical perspective, the 2014 Subaru Legacy tail lights are built to meet strict safety regulations, utilising durable materials and sealed units that protect against water ingress, dust, and other environmental elements. This ensures the lights not only provide clear visibility but also maintain reliability over time without frequent failures.
Given their importance, keeping the tail lights in good working order should be part of regular vehicle maintenance. If a tail light stops working, it compromises both the safety of the Legacy's driver and others on the road, and it may also lead to a fine or failed vehicle inspection. Subaru designed the lighting system for easy access, allowing tail light bulbs to be replaced without the need for professional mechanical help in many cases.
When servicing the 2014 Legacy tail lights, owners should check the following:
- Ensure all tail light bulbs are functioning correctly and that no bulbs are dim or burnt out.
- Check the light lenses for cracks, cloudiness, or damage that could reduce visibility.
- Make sure the tail light housings are securely fitted and sealed to prevent moisture from entering.
If any bulbs need replacing, it is important to use the correct type specified for the Legacy, which can be found in the owner's manual or through Subaru parts retailers. Using the wrong bulb can lead to poor lighting performance or damage to the socket. For those interested in upgrading, LED tail lights are an option, offering longer life and brighter illumination, but it is essential to ensure compatibility with the vehicle's electrical system.
Routine cleaning of the tail light lenses also helps maintain optimal light output. Dirt and grime can accumulate over time, dulling the brightness of the lights. A gentle wash with car soap and water or specialised headlight and tail light cleaning products is usually sufficient.
In addition to regular checks and bulb replacements, Subaru Legacy owners should also keep an eye on the wiring and connectors. Corrosion or loose connections can cause intermittent or complete failure of the lights. If electrical problems are suspected, it is advised to get the system tested by a professional to avoid electrical faults that could affect multiple lighting functions.
When replacing tail light units themselves, such as due to damage from a collision or ageing, Subaru recommends using genuine parts to preserve the original fit and finish of the vehicle. Aftermarket alternatives can sometimes be less reliable or not meet the exact specifications, which may impact the safety and legality of the vehicle's lighting system.
Overall, tail lights on the 2014 Subaru Legacy play a vital safety role, and regular inspection and maintenance are key to keeping them functioning perfectly. A quick glance at the tail lights should be part of your normal vehicle checks, so you can drive confidently, knowing that your Legacy is signalling clearly to others on the road.