Your Selected Vehicle
Filter
Filter By
Parts for your 2014 Nissan Pathfinder-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Explore 4WD & Adventure
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
2014 Nissan Pathfinder tail-lights
Tail-lights are absolutely fitted to the 2014 Nissan Pathfinder. Technical references including the 2014 Nissan Pathfinder Owner’s Manual (Lighting section) and the R52 Factory Service Manual (Exterior Lighting System) describe the rear combination lamps (tail/stop/indicator) and the high-mounted stop lamp, which are required for ADR and NZTA compliance. So yes—tail-lights are relevant, used and essential on this model.
On the Pathfinder, the rear combination lamps handle rear position lighting (tail), brake lights, and indicators, with reverse lights nearby. Depending on trim and market, the tail/stop function may be LED (sealed into the lamp) or conventional bulbs. Either way, they’re there to make the vehicle clearly visible from behind at night and in poor weather, and to signal braking and turns to other road users.
As part of regular servicing, a quick tail-light check is a smart move. Give the lenses a once-over for cracks, fading or moisture, then turn on the parkers, press the brake, and indicate left/right to confirm everything’s lighting up evenly. If a bulb version is fitted, replace lamps in pairs to keep brightness matched. If the vehicle has LED tail-lights, the LEDs aren’t user-replaceable