Your Selected Vehicle
Parts for your 2014 Mazda Premacy-Headlights
LED Autolamps 12V Round Indicator Lamp With Amber Lens Recessed Mount 130mm Diameter - 102A
Explore 4WD & Adventure
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps Multi Volt Indicator Lamp With Clear Lens And Chrome Reflector Blister Pack - 131CAM
LED Autolamps Twin function side indicator with amber side marker - 97AIMCSB
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMCSB
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIM
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIM
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps 10/30V Chrome Series LED Red Amber Side Marker With 40cm Wire - 35CCARM
LED Autolamps Twin function front position with supplementary front indicator - 97WIMB
LED Autolamps Twin function front position with supplementary front indicator - 97CWIM
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMCSB
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
LED Autolamps 12/24 Multi Volt Stop/Tail Lamp 36 LEDs With 40cm Wire - 80RM
2014 Mazda Premacy Headlights
Headlights are absolutely fitted to and relevant for the 2014 Mazda Premacy. This is confirmed by the 2014 Mazda Premacy/Mazda5 owner’s manual (lighting section), which details halogen or HID headlamp variants by trim and market. It also aligns with Australian Design Rules (e.g., ADR 13/00, 46/00) and the NZ Land Transport Rule: Vehicle Lighting 2004, which require compliant dipped and main-beam headlamps on road vehicles. So, yes—this model uses headlights as standard equipment.
On the 2014 Premacy, the headlights do the heavy lifting for safe night and low‑visibility driving. They light the road ahead, help others see the vehicle, and manage glare thanks to low and high beam patterns. Depending on the grade and market, it may have halogen reflector units or factory HID/Xenon projectors with auto‑levelling and, in some cases, adaptive front lighting. Either way, the goal’s the same: clear, comfortable visibility without dazzling oncoming traffic.
As part of regular servicing, it pays to give the headlights a once‑over. Lenses can haze over time from UV exposure, bulbs dim gradually with age, and the aim can drift with bumps and loads. Replacing bulbs in pairs keeps brightness even left to right, and sticking with ADR/NZ‑compliant replacements keeps the car road‑legal and WOF/rego‑friendly.
- Check operation: low beam, high beam, and indicators weekly—quick two‑minute habit.
- Clean lenses with a pH‑neutral wash, if they’re cloudy, consider a proper headlight restoration kit.
- Look for moisture inside the unit. Light mist after rain can be normal, persistent condensation suggests a failed seal.
- Replace bulbs without touching the glass—use gloves to avoid hot spots and early failure.
- Verify aim after suspension or load changes, mis‑aimed lights can fail a WOF or attract attention from the cops.
Many owners can swap a halogen bulb via the engine bay by removing the dust cap, disconnecting the plug, and twisting the bulb holder. HID systems are best left to a qualified tech due to high voltage and the need for correct levelling. If upgrading, avoid simple “plug‑in” LED bulbs in halogen housings unless the assembly is specifically certified, legality and beam quality can be an issue in both Australia and New Zealand. A trusted workshop can confirm the correct spec for the exact trim and market, reset the aim, and ensure everything stays compliant for daily driving.
Popular questions about 2014 Mazda Premacy headlights
What headlight bulb types does the 2014 Mazda Premacy use?
Most models use halogen for low and high beam, while some higher trims or certain markets came with factory HID/Xenon projectors and auto‑levelling. Because bulb specs vary by trim and market, it’s best to confirm against the owner’s manual or the label near the headlamp housing under the bonnet.
Are LED headlight upgrades legal in Australia and New Zealand?
They’re only road‑legal if the complete lamp/assembly is approved to the relevant standards. Swapping an LED bulb into a halogen housing is often non‑compliant and may fail a WOF or roadside check. If keen on LEDs, look for a certified full replacement unit or seek advice from a workshop familiar with local rules.
How often should the headlights be serviced or checked?
Give them a quick check monthly and at each service interval. Replace halogen bulbs in pairs when one fails or every few years as brightness drops over time. If the vehicle has HID, have a technician inspect colour shift, output, and levelling during scheduled maintenance.