Parts for your 2013 Toyota Mark x-Tail lights

2013 Toyota Mark X tail-lights

Tail-lights are absolutely fitted to the 2013 Toyota Mark X (GRX130/GRX133). Technical documentation including the Toyota Mark X GRX130 Repair Manual (Lighting – Rear Combination Light), Toyota Electronic Parts Catalogue listings for “Rear Combination Lamp Assembly LH/RH”, and the model’s Owner’s Manual confirm rear combination lamps are standard equipment. That lines up with road rules too: Australian Design Rules ADR 13/00 (installation of lighting) and ADR 49/00 (position/stop lamps), and New Zealand’s Land Transport Rule: Vehicle Lighting 2004 all require compliant rear position and stop lamps on passenger cars.

On this model, the rear combination lights provide tail (position) lighting, stop/brake, indicators, and reverse lighting. Many grades use LED elements for the tail/stop functions, while indicators and reverse often remain as replaceable bulbs. The point is simple: be seen, be safe, and keep the rego/WOF inspector happy, especially in low light and poor weather.

As part of routine servicing for a 2013 Toyota Mark X, it pays to give the tail-lights a quick once-over. Look for cracked lenses, fading, or condensation. If a bulb’s out, replace it promptly—and ideally in pairs so brightness matches. For LED-equipped assemblies, a failed section usually means swapping the whole lamp. Always confirm bulb types and procedures in the owner’s manual or parts catalogue for the exact grade.

• Function check: Test tail, brake, indicators, and reverse lights monthly. Use a wall or mate’s help to confirm all are bright and even.
• Cleaning: Wash lenses with pH-neutral car shampoo