Parts for your 2013 Toyota Land cruiser-Coolant

2013 Toyota LandCruiser coolant — purpose, care, and change advice

Coolant absolutely is used on the 2013 Toyota LandCruiser. Toyota’s owner’s manual and service literature for the 200 Series (petrol and 1VD‑FTV diesel) specify a factory fill of Toyota Super Long Life Coolant (pink). Toyota’s technical publications and the Super Long Life Coolant product spec confirm it’s a pre-mixed ethylene‑glycol, OAT formulation designed for modern alloy engines used in Australia and New Zealand.

In this LandCruiser, coolant does far more than stop freezing. It raises the boiling point, resists corrosion, lubricates the water pump, and keeps temps steady under load — whether it’s towing a van up the Kaimais or crawling a rutted track in the Top End. Keeping the right coolant in good nick protects the alloy heads, heater core, radiator and all the small passages that cop it hardest when things get hot.

The recommended fluid is Toyota Super Long Life Coolant (pink) 50/50 premix. Owners shouldn’t mix it with other colours or “universal” green — Toyota’s own guidance is to stick with the correct SLLC, and fully flush if the history’s unknown. If concentrate is ever used, only top up with demineralised water to maintain the proper ratio, but the pink SLLC commonly supplied here is already premixed.

Service timing is generous: Toyota service information for this era sets the first coolant change at up to 160,000 km or 10 years, then every 80,000 km or 5 years thereafter. Vehicles that tow heavy, idle for long periods, or work in hot, dusty conditions should have the system inspected more often — check the level, clarity and condition at each service.

Good habits under the bonnet make a big difference:

• Check the expansion tank when the engine’s cold