Parts for your 2013 Toyota Hiace-Drive belt pulley

2013 Toyota Hiace drive-belt pulleys: what they do and when to sort them

Yes, a drive-belt pulley is absolutely used on the 2013 Toyota Hiace (H200 series). Technical sources that document this include the Toyota Hiace H200 Repair Manual (V‑ribbed belt and crankshaft pulley sections), Toyota’s Electronic Parts Catalogue for 2013 Hiace variants (which lists the V‑ribbed belt, idler pulley and belt tensioner for 1KD‑FTV diesel and 1TR‑FE/2TR‑FE petrol engines), plus general accessory drive guidance from Gates ABDS and alternator pulley notes from Schaeffler INA. Together, they confirm the Hiace runs a V‑ribbed accessory belt system with multiple pulleys.

On a 2013 Hiace, the drive-belt pulleys route engine power from the crankshaft to run the alternator, air‑con compressor and power steering. The crank pulley (harmonic balancer) dampens torsional vibration to protect the belt and accessories, while the idler and automatic tensioner pulleys keep the belt tracking straight and at the right tension. Some alternators use an overrunning pulley to smooth belt loads during rapid RPM changes. Note for engine specifics: on the 1KD‑FTV diesel, the water pump is driven by the timing belt, not the accessory belt