Your Selected Vehicle
Filter
Filter By
Parts for your 2013 Subaru Legacy-Headlights
Narva Rotary Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61082BL
Fitment Notes:
Narva Battery Master / Isolation Switch Plastic With Removable Key (Contacts Rated 100A at 12V) - 61038BL
Fitment Notes:
OEX Battery Master / Isolation Switch On/Off SPST (Contacts Rated 75A @ 12V) - ACX3409
Fitment Notes:
OEX Battery Master / Isolation Switch On/Off SPST (Contacts Rated 275A @ 12V) - ACX3412
Fitment Notes:
Narva Rotary Battery Master / Isolator Switch With Removeable Keyed Knob (Contacts Rated 100A @ 12V) - 61036BL
Fitment Notes:
Hella Battery Master / Isolation Switch On/Off Spst (Contacts Rated 50A @ 12V) - 4650
Fitment Notes:
Explore 4WD & Adventure
Hella Battery Master / Isolation Switch 12V On/Off Spst (Contacts Rated 175A @ 12Vdc) - 4640
Fitment Notes:
Narva Battery Master / Isolation Switch Plastic With Removable Key (Contacts Rated 100A at 12V) - 61038
Fitment Notes:
Narva 4 Position Rotary Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61084BL
Fitment Notes:
Narva Automotive/Marine Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61044BL
Fitment Notes:
Narva Heavy Duty Battery Master / Isolation Switch with Removable Key (Contacts Rated 250A @ 12V) - 61050
Fitment Notes:
Narva Rotary Battery Master / Isolator Switch With Removeable Keyed Knob (Contacts Rated 100A 12V) - 61036
Fitment Notes:
OEX Battery Master / Isolation Switch On/Off SPST (Contacts Rated 250A @ 12V) - ACX3424
Fitment Notes:
OEX Battery Master / Isolation Switch Off/On SPST (Contacts Rated 200A @ 12V) - ACX3410
Fitment Notes:
Narva Battery Master / Isolation Switch Lever Type (Contacts Rated 180A @ 12V) - 61070
Fitment Notes:
OEX Mini Battery Master / Isolation Switch SPST (Contacts Rated 100A @ 32V) - ACX3401BL
Fitment Notes:
Narva Battery Master / Isolation Switch Lever Type With Indexing Post (Contacts Rated 180A @ 12V) - 61074
Fitment Notes:
Narva Dual Pole Battery Master / Isolation Switch Lever Type With Lockout (Contacts Rated 250A @ 12V) - 61066
Fitment Notes:
Bosch Battery Master / Isolation Switch On/Off DPST (Contacts Rated 250A @ 12V) - 0341003004
Fitment Notes:
Narva Dual Pole Battery Master / Isolation Switch Lever Type With Indexing Post (Contacts Rated 180A @ 12V) - 61080
Fitment Notes:
Understanding Headlights on the 2013 Subaru Legacy
The 2013 Subaru Legacy definitely comes equipped with headlights, an essential component for any vehicle on the road, especially down under where driving conditions can change rapidly. Headlights are not just a legal requirement but a fundamental safety feature that ensures you can see and be seen by other drivers during low light or adverse weather conditions. In this model, Subaru installed well-designed headlights that provide reliable illumination, helping to keep drivers safe during night-time or foggy drives.
Headlights on the 2013 Subaru Legacy are typically a combination of halogen bulbs, although some variants or trims might feature projector headlights for enhanced light focus. The design balances efficiency with brightness, giving drivers a good view of the road without causing discomfort or glare to oncoming traffic.
So why are headlights important? First up, headlights play a vital role in visibility, especially at dusk, dawn, or when the weather turns rough. They light up the roadway and any potential hazards that could appear, such as pedestrians, animals, or sharp corners. At the same time, headlights make your vehicle visible to others, reducing the chance of accidents due to unseen cars. For the 2013 Subaru Legacy, the headlights are perfectly suited to typical Australian driving conditions, whether you are on a well-lit freeway or cruising through rural backroads.
When it comes to maintenance or replacement of the headlights on the 2013 Subaru Legacy, it pays to stay on top of their condition. Over time, headlights can dim or become clouded, mainly due to exposure to sunlight, insects, and road grime. This diminishes their effectiveness and compromises safety. Subaru owners should check their headlights regularly, making sure they are both clean and properly aligned.
Replacing headlight bulbs on this Legacy model is pretty straightforward. Most of the time, the bulbs are halogens, which are widely available, affordable, and simple to install with just basic tools. If you notice one of the lights flickering or not working at all, it is best to swap it out sooner rather than later. Running a vehicle with one headlight out is not only unsafe but also illegal in most states.
Aside from bulb replacement, it's important to inspect the headlight housing for cracks or moisture build-up. Moisture can fog up the lens or cause electrical issues, leading to headlight failure. Cleaning out the inside of the housing or resealing the unit can prevent these problems and extend the life of your headlight assembly.
Another point to keep in mind is how the alignment of the headlights affects your driving. Misaligned headlights can blind other drivers or fail to illuminate the road properly, jeopardising safety. A quick adjustment can often solve this issue and is usually part of a routine service check for your Subaru. Many service centres offer alignment checks for free or as a quick add-on to your usual servicing.
Upgrading headlights is another popular consideration among Subaru Legacy owners. While the standard headlights do the job, some drivers prefer upgrading to LED or HID bulbs for brighter and more energy-efficient lighting. However, it's essential to select bulbs compatible with the 2013 Legacy's electrical system and headlight housing to avoid damage or legal issues. Any upgrade should meet Australian Design Rules (ADR) regulations to ensure compliance on public roads.
In terms of maintenance tips, Subaru drivers should wipe down the headlight lenses regularly with a gentle cleaner to remove dirt and bugs. Using a dedicated headlight restoration kit is also a good idea if the lenses start to appear hazy or yellowed. Keeping the battery and alternator in good shape supports headlight performance, as these components supply the electricity needed for consistent brightness.
Routine servicing of your 2013 Subaru Legacy usually includes checks on the headlights, ensuring they are functioning correctly and safely. Mechanics will verify that each bulb is at the correct brightness and alignment, and inspect the wiring and connectors for any signs of corrosion or damage. This routine attention helps avoid unexpected light failures and keeps the vehicle roadworthy.
To sum it up, headlights on the 2013 Subaru Legacy are an indispensable part of the car's safety features. They deliver solid lighting performance for everyday and challenging driving conditions across Australia. Keeping them clean, replacing bulbs when needed, and checking alignment are all straightforward ways to ensure these headlights continue to provide the visibility and safety that every driver deserves on the road.