Parts for your 2013 Honda Stream-Tail lights

2013 Honda Stream tail-lights — purpose, care, and replacement tips

Tail-lights are absolutely fitted to the 2013 Honda Stream. Honda’s Owner’s Manual for the Stream (RN6–RN9 series) details the rear combination light functions, and Honda’s Electronic Parts Catalogue lists complete rear combination lamp assemblies for 2013 RN7/RN8 variants. Beyond manufacturer documentation, Australian Design Rules (ADR) for lighting and New Zealand’s Land Transport Rule: Vehicle Lighting 2004 both require operational rear position (tail) lamps on road-going vehicles. So yes—tail-lights are relevant, required, and part of every 2013 Honda Stream.

On the 2013 Stream, the tail-lights sit within a rear combination lamp cluster that handles tail (rear position), stop (brake), indicators, and reverse lighting. Their job is to make the vehicle visible from behind, especially at night and in poor weather. They illuminate whenever the parkers or headlights are on, and they need to be bright, evenly lit, and the correct red colour to keep things legal and safe on Aussie and Kiwi roads.

Most 2013 Stream models use conventional bulbs in a sealed housing, though some trims may include LED elements. Either way, regular checks help avoid fines and keep the family safe. A quick walk-around once a month, plus a check after heavy rain, is a smart habit.

• Replacement basics:
  1. Open the tailgate and remove the interior access cover for the lamp area.
  2. Undo the retaining screws/bolts and gently release the lamp from its clips.
  3. Twist the bulb holder out, replace the bulb with the correct spec from the owner’s manual.
  4. Avoid touching glass bulbs with bare fingers, use a clean cloth.
  5. Refit the holder, seat the housing carefully, and tighten fixings evenly to avoid cracking.
  6. Test tail, brake, and indicators before closing up.
• Maintenance tips:
  • Keep lenses clean, road grime dulls output.
  • Inspect gaskets and vents to prevent condensation, replace seals if moisture appears.
  • Use dielectric grease sparingly on connectors to resist corrosion.
  • Avoid dark tints or non-compliant bulbs, they can breach ADR/NZ rules.
  • If one stop/tail bulb fails, consider replacing both sides for even brightness.

If the car has had a rear knock, check lamp alignment and mounting tabs—misalignment can let water in and cook bulbs. For bulb specs and torque values, the Stream’s owner’s manual and a dealer parts counter (with the VIN) are the best references.

Popular questions

What bulb type fits the 2013 Honda Stream tail-lights?
Bulb specs can vary by trim and market. The safest bet is the bulb chart in the owner’s manual or asking a Honda parts counter with the VIN. That way they’ll match the correct tail/stop, indicator, and position bulbs without guesswork.

Why is there moisture inside the tail-light?
Light condensation can occur from normal venting, but persistent water droplets usually mean a tired gasket, cracked housing, or a loose vent cap. Dry the housing, check and replace the seal, and ensure the lamp is seated snugly. If cracks are present, a new assembly is often the only lasting fix.

Can aftermarket LED bulbs be used in the Stream’s tail-lights?
They can, but only if they’re compliant and suitable for the housing. The light must remain red, bright enough, and not dazzle. For indicators, LEDs can cause hyperflash without load correction. Always choose ADR/NZ-compliant parts and verify performance after fitting.