Your Selected Vehicle
Parts for your 2013 Honda Cr-v-Headlights
LED Autolamps LED Autolamps Front Indicator/Position LED Light Clear Lens 12v Twin Blister Pack - 175AW/2
Fitment Notes:
Explore 4WD & Adventure
OEX 4mm 3 Core Automotive Cable, Red/Black/Blue With Black Sheath - 30m Roll - ACX0819
Fitment Notes:
OEX 3mm Twin Core Tinned Marine Cable, Red/Black With White Sheath - 50m Roll (NZ Ref. 157M) - ACX0970
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Licence LED Light With 4 Pin Plug - 99ARLM4P
Fitment Notes:
Icon Heavy Duty Battery Terminal Hex Bolt Clamp Style M10 Negative 1 Piece - BT19-10NEG
Fitment Notes:
OEX Crimp Terminal Female Blade Brass Terminal Entry 5 x 0.8mm Non Insulated 100 Pce - ACX3077
Fitment Notes:
OEX Voltage Drop Resistor (24V To 12V) Suits 12V Switches With Led Indicator - Pack Size (1) - ACX3912
Fitment Notes:
Narva Crimp Terminal Male Blade Red Terminal Entry 6.3 x 0.8mm Heat Shrinkable 20 Pce - 56320BL
Fitment Notes:
OEX Battery Master / Isolation Switch On/Off SPST (Contacts Rated 250A @ 12V) - ACX3424
Fitment Notes:
Guide to Replacing and Maintaining Headlights on Your 2013 Honda CR-V
Owning a 2013 Honda CR-V is about enjoying reliable transport with added comfort and an impressive array of features. One crucial maintenance aspect that sometimes gets overlooked is the care of your headlights. Good headlights do more than illuminate the road, they ensure your safety as well as that of others. Whether you need to replace a bulb or just perform regular maintenance, knowing how to handle your CR-V's headlights is essential.
When it comes time to replace a headlight bulb, the process is fairly straightforward. Make sure you have the right bulb size, for a 2013 Honda CR-V, the low beam typically uses an HB4 bulb. To get started, pop the bonnet and locate the headlight housing area behind your front bumper. Ensure your car is switched off and the keys are out of the ignition to avoid any electrical mishaps.
- Identify the Bulb Housing: You'll see a black plastic cover at the back of the headlight assembly. Twist it to remove the cover and expose the bulb socket.
- Remove the Old Bulb: Disconnect the wiring harness from the back of the bulb. Grip the bulb firmly and twist counterclockwise to remove it from the socket.
- Install the New Bulb: Avoid touching the glass part of the new bulb with your fingers, as oils from your skin can shorten its life. Line up the new bulb with the socket, twist it clockwise to lock it into place, and reconnect the wiring harness.
- Secure and Test: Replace the plastic cover by twisting it back on. Finally, turn on the car and switch on the headlights to ensure everything is working correctly.
Regular maintenance of your headlights is just as important as replacing them. Over time, headlight lenses can become foggy or yellowed due to UV exposure and grime. It's worthwhile to periodically clean your headlights with a dedicated cleaner or even a DIY paste of baking soda and water. Applying a UV-resistant sealant afterwards can also keep them looking clear for longer.
Check your headlight alignment periodically to ensure they're pointing in the correct direction. Misaligned headlights can hinder your visibility and annoy oncoming motorists. Adjusting them is usually a matter of turning the alignment screws located on the headlight assembly.
Should your headlights ever develop issues like flickering, it could be a sign of electrical problems. In such cases, consulting a professional mechanic is the way to go.
Incorporating these practices into your regular vehicle maintenance routine will not only extend the life of your headlights but also enhance your safety and driving experience. So go ahead, give your 2013 Honda CR-V the love it deserves with a headlight check-up today.