Your Selected Vehicle
Parts for your 2013 Honda Cr-v-Headlights
Great Whites Attack 18 inch Dual Row 24 LED Light Bar with Backlight - GWD5244
Fitment Notes:
Explore 4WD & Adventure
Drivetech 4x4 QC3.0 Quick Charge USB, Type-C Port and Voltage Display Power Socket - DT-17103
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Ind/Rev With Try Me Function Diffused Tail With Sequential Indicator Twin Blister - 385ARWM-2
Fitment Notes:
Narva Push Button Starter Switch On/Off Momentary SPST Red LED (Contacts Rated 50A @ 12V) - 60099BL
Fitment Notes:
Narva Crimp Terminal Flag Female Blade Brass Terminal Entry 6.3 x 2.1mm Non Insulated 100Pk - 56228
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
OEX 10mm Twin Core Automotive Cable, Red/Black, With Clear Sheath - 10m Roll - ACX0822
Fitment Notes:
Guide to Replacing and Maintaining Headlights on Your 2013 Honda CR-V
Owning a 2013 Honda CR-V is about enjoying reliable transport with added comfort and an impressive array of features. One crucial maintenance aspect that sometimes gets overlooked is the care of your headlights. Good headlights do more than illuminate the road, they ensure your safety as well as that of others. Whether you need to replace a bulb or just perform regular maintenance, knowing how to handle your CR-V's headlights is essential.
When it comes time to replace a headlight bulb, the process is fairly straightforward. Make sure you have the right bulb size, for a 2013 Honda CR-V, the low beam typically uses an HB4 bulb. To get started, pop the bonnet and locate the headlight housing area behind your front bumper. Ensure your car is switched off and the keys are out of the ignition to avoid any electrical mishaps.
- Identify the Bulb Housing: You'll see a black plastic cover at the back of the headlight assembly. Twist it to remove the cover and expose the bulb socket.
- Remove the Old Bulb: Disconnect the wiring harness from the back of the bulb. Grip the bulb firmly and twist counterclockwise to remove it from the socket.
- Install the New Bulb: Avoid touching the glass part of the new bulb with your fingers, as oils from your skin can shorten its life. Line up the new bulb with the socket, twist it clockwise to lock it into place, and reconnect the wiring harness.
- Secure and Test: Replace the plastic cover by twisting it back on. Finally, turn on the car and switch on the headlights to ensure everything is working correctly.
Regular maintenance of your headlights is just as important as replacing them. Over time, headlight lenses can become foggy or yellowed due to UV exposure and grime. It's worthwhile to periodically clean your headlights with a dedicated cleaner or even a DIY paste of baking soda and water. Applying a UV-resistant sealant afterwards can also keep them looking clear for longer.
Check your headlight alignment periodically to ensure they're pointing in the correct direction. Misaligned headlights can hinder your visibility and annoy oncoming motorists. Adjusting them is usually a matter of turning the alignment screws located on the headlight assembly.
Should your headlights ever develop issues like flickering, it could be a sign of electrical problems. In such cases, consulting a professional mechanic is the way to go.
Incorporating these practices into your regular vehicle maintenance routine will not only extend the life of your headlights but also enhance your safety and driving experience. So go ahead, give your 2013 Honda CR-V the love it deserves with a headlight check-up today.