Your Selected Vehicle
Parts for your 2013 Honda Cr-v-Headlight bulbs
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
LED Autolamps Twin function side indicator with amber side marker - 97CAIMCSB
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
Explore 4WD & Adventure
LED Autolamps 12V Stop/Tail/Ind/Rev LED Light Kit 450mm Loom DT04 Connector - SO282ARWM2LR450
LED Autolamps Multi Volt Round Indicator Lamp With Amber Lens Recessed Mount - 102AM
LED Autolamps 12V Sequential Indicator Strip Light 10 Square LEDS Amber Lens Bulk Packaging - 235ASEQB
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reflector Light 28cm Cable Blister Pack - 275MAR
LED Autolamps 12V Front Indicator/Marker Lamp 80mm Round Blister Pack - 80AW
LED Autolamps 12/24V Stop/Tail/Indicator/Reflector With Licence Plate Lamp - 99ARLM
LED Autolamps 174 Series Rear Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174AMB
LED Autolamps 12/24V LED Stop/Tail/Indicator Lamp With Reflex Reflector Blister Pack 1 pce - 150ARM
LED Autolamps 10/30V LED Side Direction Indicator Light With 3m Tinned Cable - 58AM3
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
LED Autolamps 12V LED Stop/Tail/Indicator Light With Reflex Reflector Twin Blister - 100BAR2
LED Autolamps Multi Volt Reverse Lamp With 35 SMDS Blister Pack With Black Base - 135WM
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
LED Autolamps 12V LED Stop/Tail/Indicator Assembly Light With Black Bracket - 80BAR
LED Autolamps Front Indicator & Position Light LED 24V Surface Mount - 135CAT124
OEX Black Nylon Cable Ties - 4.8mm x 200mm, with Mounting Hole - 100 Pc - ACX1318
2013 Honda CR‑V headlight bulbs
Headlight bulbs are absolutely used on the 2013 Honda CR‑V. Honda’s 2013 CR‑V Owner’s Manual and service information list replaceable halogen bulbs for the headlamps (commonly H11 for low beam and HB3/9005 for high beam, depending on market/trim). Independent bulb catalogues from major manufacturers (e.g., Philips and OSRAM) also specify H11 and HB3/9005 applications for this model year. That means they’re a normal service item, not a sealed LED unit.
On a 2013 CR‑V, the headlight bulbs do the heavy lifting for safe night driving and being seen in poor weather. They sit in the headlamp housing and project a controlled beam so you can spot hazards early and avoid dazzling oncoming traffic. As halogens age, they slowly lose brightness and shift colour, so fresh bulbs can noticeably sharpen up night vision.
Servicing is straightforward and a good time to give the lights some love. Access is from the engine bay: remove the rear cover, twist the bulb anticlockwise, unplug it, then refit in reverse. Don’t touch the glass—skin oils can hot‑spot and shorten life. If you do, clean with isopropyl alcohol before fitting.
- Typical sizes: Low beam H11, High beam HB3/9005. Always confirm against the vehicle sticker, owner’s manual, or VIN‑based parts lookup—some markets vary.
- Replace in pairs to keep light output and colour even left‑to‑right.
- Aim matters: after any bulb change, check headlight aim so you meet ADR/WOF requirements and don’t glare other drivers.
- Upgrade options: Premium halogen (+150% types) give more reach, but may have a shorter lifespan. LED/HID retrofits may not be road‑legal in Australia or New Zealand unless the entire assembly is approved—check local rules before fitting.
- Maintenance checks: look for dimming, flicker, or a pinkish/yellow tinge, inspect the lens for haze, and ensure the connector isn’t heat‑scorched. Check the relevant fuse if a new bulb won’t light.
As a rule of thumb, consider proactive replacement around 2–4 years or 40–60,000 km if you do lots of night or rural driving. Keep the lenses clean, don’t run mismatched bulbs, and get the beam pattern checked at your next service—easy wins for better safety after dark.
Popular questions about 2013 Honda CR‑V headlight bulbs
What bulb types fit the 2013 CR‑V headlights?
Most 2013 CR‑V models use H11 for low beam and HB3/9005 for high beam. There can be market or trim differences, so it’s smart to confirm against the owner’s manual or a VIN‑based parts guide. Fog lamps are typically H11 as well.
Can the 2013 CR‑V use LED bulbs?
While many LED retrofits physically fit H11/HB3 sockets, they may not be road‑legal unless the headlamp assembly is approved for LED. For ADR/WOF compliance and proper beam focus, stick with quality halogens or use a fully approved LED headlamp assembly where available. Always check local regulations.
How often should headlight bulbs be replaced?
Halogen bulbs slowly dim over time. If night vision feels lacklustre, replace both sides together. Many owners swap them every few years as preventative maintenance, especially if driving frequently at night or on unlit roads.