Your Selected Vehicle
Parts for your 2013 Holden Commodore-Tail lights
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Fitment Notes:
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector 3 Lamp Combination Black Chrome - MAXILAMPC3XRW
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
Understanding Tail-Lights on the 2013 Holden Commodore
The 2013 Holden Commodore, like most modern vehicles, comes equipped with tail-lights as a standard and essential safety feature. Tail-lights play a critical role in ensuring that the car is visible to other road users, especially during low-light conditions such as dusk, dawn, fog, rain, or at night. While some car owners might overlook these components because they rarely get attention beyond random bulb replacements, the truth is tail-lights are vital for safe driving and road safety compliance in Australia.
Tail-lights are located at the rear of the vehicle and they illuminate red when the headlights or parking lights are on. This helps other drivers see the car's position and size, reducing the risk of rear-end collisions. Additionally, they work in unison with brake lights and indicator signals to communicate the driver's intentions on the road. For a vehicle like the 2013 Holden Commodore, which is a popular mid-size sedan in Australia and New Zealand, having fully functional tail-lights is critical due to the often varying weather conditions and heavy traffic environments where visibility matters a lot.
It's worth noting that tail-lights are different from brake lights, though they share the same rear assembly in many cases. Tail-lights glow dimmer when the vehicle's lights are switched on, while brake lights illuminate more brightly when the driver presses the brake pedal. Some tail-light assemblies on the Commodore also incorporate turn signals and reverse lights, forming an all-in-one rear lighting unit.
When it comes to servicing or replacing tail-lights on the 2013 Holden Commodore, there are a few friendly pointers to keep in mind:
- Regular checks ensure that the tail-lights are working correctly since faults can be hard to notice until someone points them out or a law enforcement officer picks up on them.
- If a tail-light bulb fails, it's best to replace it without delay to avoid fines or potential hazards on the road.
- The replacement bulbs for the 2013 Commodore are typically standard sizes like P21/5W or similar, it's advisable to consult the owner's manual or a trusted auto parts supplier to get the correct bulb type.
- Some Commodores, depending on the trim level, come with LED tail-lights rather than traditional filament bulbs. LEDs tend to last longer but if one LED fails, the whole unit might require specialized attention or replacement.
- Installation of tail-light bulbs is quite straightforward, involving access via the rear panel or removing the tail-lamp housing, but care should be taken not to damage seals or wiring.
- Keeping the tail-light lenses clean also helps maintain brightness and visibility. Over time, the clear plastic may become dull or scratched, affecting how well the lights show up at night.
During routine servicing or vehicle inspections, tail-lights should be thoroughly checked alongside all other exterior lights to ensure compliance with Australian Design Rules (ADRs) and state road regulations. This includes verifying correct illumination, colour, and positioning as outlined for the Commodore and similar vehicles.
Should the tail-light unit itself become damaged from impacts, cracked, or discoloured, it's usually better to replace the entire assembly rather than attempt complicated repairs. Not only does this maintain the car's appearance, but it also guarantees the lights remain effective and waterproof, preventing electrical faults caused by moisture ingress.
The 2013 Holden Commodore tail-lights are designed with durability in mind, but over years of driving, exposure to harsh sun, dust, and grime can take its toll. Using a mild plastic polish on the lens occasionally can help restore clarity and potentially extend the useful life of the tail-lights.
For those who are not confident about DIY replacements or inspections, visiting a qualified mechanic or Holden dealership is a sound option. Professionals have the right tools and expertise to quickly diagnose any tail-light issues and provide genuine replacement parts if needed.
In the grand scheme, tail-lights may seem like small components, but they are vital for the safety of everyone on the road. Keeping them in top shape on a vehicle such as the 2013 Holden Commodore is a simple yet important part of responsible car ownership.